449 press releases : Analysis and material characterisation, Test rigs

Hegewald & Peschke Meß- und Prüftechnik GmbH has successfully modernised seven Zwick universal testing machines at Alcan Packaging Singen, which is a distributor of high-quality processed aluminium-based packaging materials. The electromechanic systems with capacities of 2 kN and 5 kN got new drives and a modern digital controller including power amplifiers. In the course of modernisation work, lo...

During the final assembly of scaffolds, fitting accuracy is of prime importance due to the fact that the individual components are very diverse in length and geometry. That is the reason why PERI GmbH based in Weißenhorn started searching for a possibility to test their components quicker, and found an experienced parter for the solution to their problem with Hegewald & Peschke GmbH. Because of ...

Brabender® Plastograph® EC plus The economical torque rheometer for mixers type 30, extruders type 19 and the conical twin screw extruder The Brabender® Plastograph® EC plus is the new economical table-top version of the universal torque rheometer Plasti-Corder® for applicational investigations or processing tasks in laboratories and simulation. With its improved torque protection system and t...

Spline gauges are go and no-go plug gauges for splines. They are used as a quick inspection method for splines with involute, straight-sided and serration flanks. The most important feature when inspecting splines is its usability- which is tested with spline gauges. The spline gauges are designed according to the tolerances 'actual' and 'effective'. Precision is our passion! We have been dea...

The combination of a Metronor DUO portable CMM and a Breuckmann stereoSCAN white-light-scanning system offers previously unknown flexibility and accuracy to users of portable measurement equipment. Probing and scanning has never been so easy and allows sophisticated measurement and inspection tasks on the shop floor. While the Metronor DUO system sets up a large working volume the stereoSCAN p...

Schneider Messtechnik, leading company in the industrial metrology presents the new workshop microscope, series WM 1 for a camera-aided measured data recording. The WM 1 is a small/handy high-tech system. Measured data recording is performed with the image processing which is integrated in the new Multicount 3000. Measuring range is of up to 300x 200x 200mm and allows the measurement of stampings,...

The electronic boiler water low level alarm WMS from AFRISO-EURO-INDEX is designed to control water levels in heating systems according to DIN EN 12828. As soon as the water level falls below a minimum level, the WMS sounds an alarm and the burner is switched off. The WMS boiler low level alarm works faultlessly and is also self-checking and does not only detect low water levels in the boiler but...

Fixturlaser AB launches a shaft alignment system for everyone who works with maintenance - no expert knowledge is required Fixturlaser GO is the latest addition to the product range “Express Alignment by Fixturlaser” with the typical characteristics of a Fixturlaser system. It is easy to use thanks to the graphic interface, and together with its technical features, such as CCD and line laser in th...

Compact solution for on-line moisture in oil detection Vaisala has extended its moisture in oil product range with the Vaisala HUMICAP® Moisture and Temperature Transmitter for Oil MMT162. This new transmitter offers a compact and economical solution for reliable continuous measurement of moisture in oil. The MMT162 incorporates the latest generation of the Vaisala HUMICAP® Sensor. This senso...

Andilog expands the availability of force and toque instruments in USA and Canada. You can now buy online your force and torque instruments directly online at Com-Ten webiste (http://www.com-ten.com)! Most of our gauges, fixtures, clamps and fastener pull testers are now available online. If you know what you want and need a quick turnaround on your order use our new secured cart to buy your next i...

Malvern Instruments has added a new capability to its award-winning Morphologi G3 automated particle characterization system, enabling the fully automated detection, enumeration and size classification of foreign particulate matter (FPM) collected on a filter. Applications range from classifying contaminants in fluids for hydraulic transmission and automotive components, to controlling particulate ...

Malvern Instruments has launched the Zetasizer APS, a new dynamic light scattering (DLS) system which automates size measurements of samples in 96- or 384-well microplates. Designed primarily for protein specialists, the new system is fully automated, simply requiring users to insert the plate and press start. The Zetasizer APS allows quick and easy investigation of a protein’s condition at differe...

ATEQ introduces the fastest leak tester for small volume. Specially adapted for medical and packaging industry (blister...) the F26 speed has an ultra compact enclosure and flexible communication format (USB - RS232 - Ethernet). this leak testing equipment has 4 range of mesurements from 500 Pa to 50 kPa.

The CDF60 calibrator checks the calibration of leak and flow ATEQ instruments as well as any other instrument. This light, compact and user friendly calibrator is essential for field or laboratory checks, when accuracy and repeatability cannot be compromised and large instrument are too bulky or too expensive. With the CDF60, you can now easily check and follow the requirements of ISO or other qu...

The AD3661 WCA mini - "It goes where you go" A&D is proud to announce the newest addition to its line of noise and vibration analyzers: the WCA mini. Today, engineers demand small, lightweight, 4-channel analyzers capable of performing noise and vibration analysis in the laboratory as well as in the field. We, at A&D Company, Limited, have answered this demand by drawing upon our superior kn...

The Dresden specialist for infrared measuring technology InfraTec GmbH presents a newly developed binocular thermal image system of the highest geometric resolution commercially available at this time. This brand new product line VarioVIEW of the exclusively represented manufacturer JENOPTIK Laser, Optik, Systeme GmbH combines a high-resolution infrared imager with an eye-safe and hardly detecta...

The new force sensor type MS02 made in stainless steel allows to measure the effort in compression or/and tension with a very high accuracy. Measurement error is less than or equal to 0.02% of its full scale. Various measurement scales are available from 0.05 to 5000 KN in 13 ranges. Its low deflection at nominal range, provides a very good dynamic response. Punctual overloads (150%) are toler...

SIKA Calibrator Series News The new TP 17-ZERO is another high-precision instrument of the SIKA calibrator series. This metal block calibrator enables the calibration of various thermometers and sensors for temperatures ranging between -10 °C and +100 °C. The 7 block bores reach the desired temperature with the aid of cutting edge Peltier technology for active cooling and heating. The desire...

The Photo DSC 204 F1 Phoenix® by NETZSCH can be used to analyze the UV curing of light-activated resin systems, adhesives, paints, coatings and dental masses. The Photo DSC 204 F1 Phoenix® can be operated in the temperature range from -100°C to 200°C and offers the following advantages: • High reproducibility resulting from well-defined intervals between the dual light conductors and the samp...

Genevac Ltd., world leader in laboratory evaporation science and engineering, has announced the launch of the revolutionary new Rocket™ Evaporator. Developed in response to users requiring an evaporator that could quickly process large volumes of solvent without supervision, the Rocket Evaporator has been designed to dry or concentrate as many as six flasks (each containing up to 450ml solvent) ...