Handles with switching function for pneumatic purposes.
Material and surface:
Handle shanks of polyamide PA6, glass ball reinforced, black, similar to RAL 9005, semi-matte with fine-grain structure. Connecting ledge of profiled aluminium, natural coloured anodized.
The Industrial Automation Group of Advantech has announced a new firmware enhancement for the ADAM-6000 Ethernet I/O modules which adds advanced Peer-to-Peer (P2P) and Graphic Condition Logic (GCL) functionality.
PEER TO PEER: With this functionality, these distributed Ethernet I/O modules can actively update input channel status to specific output channels. In the past, a contro...
The EXNMC actuators are intended for the operation of:
- Modulating control ball valves
- Air control Damper in ventilation and air condition system up to approx 2mq.
Features
Mode of operation: The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and travels to the position defined by the control signal. The measuring voltage U serves for the e...
Unexpected machine downtimes due to unforeseeable failures are now a thing of the past. Condition monitoring and diagnostic systems monitor critical components as well as process states online and provide a timely warning of any deviations from a reference value. With sensors and electrical terminals for cock terminals from Festo for component and system diagnostics, OEMs and system operators can...
Employs new self-developed slim optical encoders for each axis. Professional encoders constantly monitor each axis movement and automatically stop operation when a position error is detected.
Automatic stop function prevents work damages and faulty processes.
Detection Accuracy X, Y-Axes: 1 mm, Z-Axis: 0.5 mm, R-Axis: 1.8 degrees
With the DIV 511 interface module from SIGMATEK, decentralized DIAS I/O components can be connected to the VARAN bus. Existing components that use the DIAS bus can be easily adapted to the real time Ethernet technology; only the software interface on the application level has to be exchanged. Previously completed development work can therefore be cost-efficiently reused with a conversion to the rea...
Electromechanical NC joining systems are taking over from the familiar hydraulic presses suppliers and conventional joining modules. In addition to environmental, energy, space, installation and maintenance benefits, it is primarily manufacturing criteria that sway the system designer towards an electromechanical system. These include flexibility, exact positioning, extremely high repeatability a...
Taipei, Taiwan, May., 2008 --- Control Engineering Magazine has chosen Korenix’s JetNet 5010G as the winner of PRODUCT OF THE YEAR 2007. Control Engineering is a well-known international magazine that offers the latest trends and technologies. Korenix wins this competition "PRODUCT OF THE YEAR 2007" with JetNet 5010G of Russian version Control Engineering magazine. The annual awards competition is ...
Comau Robotics returns at Lamiera 2008: research, technological development and innovation at the fourteenth edition of one of the most qualified international trade shows in the sheet metal manufacturing sector.
Well-known as one of the most qualified international trade shows in the metal forming systems manufacturing sector, LAMIERA will hold its fourteenth edition in the exhi...
It is a low-cost paperless recorder in 6.4" bigger size VGA TFT display with highest resolution 640x480 pixels, infrared detector, 1~6 channels, plug & play I/O cards. It has many other unique features too, 12 soft keys for easy operation, universal input, the shortest depth 174mm, well designed portable handle, fully isolated channels, reliable and high capacity storage media CF card.
Brainchild supplies various sizes of INDUSTRIAL HMI including 2.5" mono text HMI 201, 4.1" mono graphic HMI 401, 5.7" mono HMI 601, 5.7" color HMI 605 & 12.1" TFT color HMI 1205. Built-in ladder program is good for the application. Many PLC drivers Siemens, Omron, LG, ABB,... are supported. Other features include offline simulation on PC, friendly multiple languages for the end users.
Cabur will be present at Bias tradeshow in Milan from May 27th to 30th, with its booth at Hall 11, H39-K40.
In that occasion new solutions in Cabur range of products will be introduced, such as: new power supplies specifications , new electronic professional filters , new electronic protections, new stamping system , new solutions on industrial terminal blocks and the range of terminal...
Up to now, the Endress+Hauser Plant Asset Management system FieldCare could only operate devices with Device Type Managers (DTMs). Some device manufacturers however back EDDL technology only and supply their devices without DTM. iDTM takes an EDD and interprets it, allowing operation of the associated device in FieldCare. At INTERKAMA fair we will be showing iDTM in action on 3rd party devices.
Advantech introduces the EKI-1521/1522 Serial Device Servers, which allow RS-232/422/485 serial devices to be remotely monitored, managed and controlled over Ethernet and Internet Protocol (IP) networks. Equipped with dual 10/100Base-TX Ethernet ports and dual Media Access Controllers (MACs), these innovative devices ensure data transmission even in the event of a network link failure.
Hsinchu. Taiwan, Atop Technologies herewith announces the release of Industrial Managed Switches: EH6508G series. Designed for harsh industrial environments and mission-critical applications where minimum network interruptions or down time is expected, the EH6508G series is a managed Layer-2 switch with six basic 10/100T ports plus 2 Giga-ports. It boasts one of world’s fastest network recovery tim...
At the functonal handles all connection contacts of pushbuttons, emergency stop and LED are lead out of the handle. There is no wiring neccessary between the elements, that individual control functions can be realised on customer`s demand.
The smdx98 ("the big brother of the smdx66) power drive represents an entirely new power
drive generation. State-of-the-art electronic components such
as digital signal processors (DSP) and completely new
current control algorithms made it possible to significantly
reduce the product cost. Still the main focus was to achieve
excellent running performance such as l...
The Industrial Automation Group of Advantech introduces the PCI-1240U 4-axis stepping/pulse-type servo motor industrial control card designed for general purpose extreme motion applications. The card has a NOVA® MCX314-motion ASIC that builds in a variety of motion control functions, such as a 2/3-axis linear interpolation, 2-axis circular interpolation, T/S-curve acceleration/deceleration rate,...
Although some customers in Norway and Sweden have already had an opportunity to experience ELDON POWER SYSTEM (EPS) for themselves, the official launch will be at this year’s Hannover Messe (21 – 25 April).
This all new system is available for a variety of DISTRIBUTION and MOTOR CONTROL CENTRE applications, and is available for use with Primary ACB´s, Secondary MCCB´s, and Te...
Parker’s Electromechanical Automation Division announces the release of the Aries Controller single-axis servo drive/controller. The Aries Controller combines the versatile and cost-effective Aries digital servo drive platform with the advanced control capabilities of the ACR servo controller.
The Aries Controller is configured, tuned and programmed using Parker’s comprehensive ACRV...
- 
- 
- 
- 
- 
- 
- 
- 
-
-
