581 press releases : Detection, Measurement: Flow, Pressure, Temperature, Level...

Turck extends switching distances for three uprox+ families Turck will present three new uprox+ models that offer the highest switching distances currently available for their specific designs at the SPS/IPC/Drives fair. The EG08 sensors allow flush mounting and provide reliable detection of metallic objects over a three mm distance. The switching distance of the only eight mm high Q08 family h...

Shanghai Yuanben Tech. Co., Ltd. is dedicated to temperature sensors, has a complete line of temperature sensors. Yuanben has developed manufacturing techniques that enable our sensor to pass testing without failure, tested for reliability in various harsh environmental, physical, and, electrical conditions. Temperature Sensors have also been subjected to environmental, electrical, and, physical...

Research at the University of Manchester has demonstrated servo systems with vastly improved dynamics with the most challenging of loads. The key to the increased performance is a torque transducer from Sensor Technology employing Surface Acoustic Wave (SAW) techniques to deliver high-bandwidth, non-contact solution. The ease of set-up of modern servo drive systems, combined with steadily reducing...

FUTEK Advanced Sensor Technology, Inc. (www.futek.com) is now offering its PFP350 Pressure Sensor with an USB output option. FUTEK Engineering Labs has been working on the USB technology since the 2nd quarter of 2008 as the demand for USB Output has increased. Utilizing metal foil strain gage technology, the PFP350 is made from 17-4 Stainless Steel, weighs 5.5 oz, has mV/V output as a standard and ...

Conax Semiconductor manufactures special spring-loaded thermocouples that are used in Ion Implant Tools. Ion Implantation is a critical step in the manufacture of semiconductors. High energy implantation can heat the wafer and cause problems that lead to yield reduction. Monitoring the temperature of wafers during implantation is required to determine the amount of wafer cooling that is required...

Accurate measurements of the mileage of freight or tank wagons are essential for efficient maintenance and economical operation. Lenord + Bauer has developed a compact electronic distance recorder to monitor the mileage of wagons or wheelsets. It can be mounted inconspicuously on the wheelset cover and is programmed with wheelset characteristics. The recorder is energy self-sufficient (no bat...

Lenord + Bauer will be presenting a new two-channel speed sensor for contact-less measurement of rotational movements at the InnoTrans trade fair. Thanks to this sensor, a high resolution can be achieved for precise traction testing in com-pact spaces. Pulse multiplication allows the compact sensor to achieve a high pulse count for small target wheels. Thanks to tailor-made cable preparation and...

Ideal for Process Plant Steam, Chilled Water, HVAC and Co-Gen Utilities Hemet, CA—October 23, 2008—Process engineers looking for a reliable solution to measuring liquids, steam or gases in harsh environments will find McCrometer’s new Corrosion-Resistant V-Cone® Flow Meter is designed for high accuracy measurement with virtually no maintenance and long life under the most challenging conditions....

The Penny+ Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc. The SSC also provides a 5Vdc source that may be used as a supply for many types of sensor, including potentiometers, contactless position transducers, tilt sensors, pressure transducers and...

Honsberg offers an inexpensive, magnetic-inductive flowmeter for the industry in all stages of extensions. The sensor detects all fluids in equipments and machines and offers unproblematic flow control and display. Features: • fast response time • no moving parts • premium technical plastic with stainless steel electrodes

Fit – set – that’s it! * Easy switch point setting using two setting rings for optimum readability. * Excellent response time: T05 = 1 s and T09 = 3 s. * Mechanical locking prevents inadvertent manipulation. * Switch points freely adjustable from -25 °C to 140 °C. “No need for setting by an expert.” The first switching temperature sensor with intuitive handling, combined w...

For parameter setting of sensors before or during set-up. * Quick and easy to mount. * Supports the parameter setting of IO-Link and EPS sensors. * In combination with FDT manufacturerindependent exchange of data. * Device configuration, documentation and diagnostics for the entire plant. * No additional sensor supply required. USB interface for parameter setting of se...

IMB Level Switch OPG02 with Sensor length arbitrary up to 3m, output PNP(200mA), 1 switch point, with cable or plug connection, thread BSP1/2", pressure up to 25bar, temperature up to +100°C, housing made of stainless steel 316Ti, closer or opener, adjustable sensitivity for any application, high measuring accuracy, Application: For liquids such as oil, water, watery mediums, foam detection. Sco...

The new MTS USB-Programmer allows quick configuration and easy testing of embedded Temposonics® position sensors via PC. Remote configuration and diagnosis of sensors that are not easily accessible directly is now possible. Quick configuration reduces downtime and start-up is accelerated considerably. After delivery, Temposonics® position sensors are factory-set according to order specification....

...St. Paul, MN USA, October 21, 2008 Lion Precision was honored with the Governor’s International Trade Award during the Governor’s Global Trade Conference in Minneapolis, Minn. The award is given to Minnesota companies that demonstrate substantial and growing international business while maintaining or increasing employment levels. The award was presented to Lion Precision president Don Martin b...

Sensortechnics’ new KTE2000CS submersible OEM pressure sensors offer precision hydrostatic low level measurement from only 50 mbar (0.5 m water column) Full Scale. The KTE2000CS series consists of highly accurate capacitive ceramic pressure cells in a rugged stainless steel construction. They feature excellent long term stability and are compatible with many corrosive and aggressive liquids. Th...

New Tool Changer developed for robots that can handle up to 1200 kg loads On September 8-13 at the 2008 International Manufacturing Technology show in Chicago, IL, ATI Industrial Automation introduced the new QC-1210 Heavy Automation Robotic Tool Changer. The QC-1210 was developed for robots that can handle up to 1200 kg loads and features three of ATI's patented Fail-Safe locking mechanisms. T...

Switzerland-based Proceq announces the launch of its latest product – Profoscope – to meet the pressing needs of the construction and building industry looking for an accurate rebar detecting instrument that is also affordably priced. Proceq claims that the new Profoscope offers the best-in-class mix of attractive features to price ever seen by the market. The Swiss-made Profoscope is small, lig...

“Smart” Displacement, Gap & Hole Sensors for Aircraft Assembly Aerospace is a major market for Capacitec’s non-contact displacement, gap and hole mapping sensors and systems. Our customers build/rebuild commercial and military aircraft and engines. For 25+ years we have worked closely with manufacturing and quality engineers as well as R&D to enhance their product designs and production and qual...

With a comprehensive line of suitable products, from the sensor to any measurement and monitoring. Providing ready solutions for applications in mechanical and electrical engineering, specifically with turbines, pumps and feeders in power plants. In chemical plants, foil and fibre production, paper and textiles. At testing facilities, plant maintenance, and R&D. ISO 9001 certified Qualit...