267 press releases : Detection, Measurement: Position, Movement, Weight, Force...

Certain measuring tasks are too complex to be handled by a single sensor. In such cases two sensors must work in tandem to generate the required measuring data: for example, when the thickness of plates made of plastics, rubber or wood or metal strip is to be measured or accuracies of large diameter measurements in the micrometer range are to be achieved. CALIX - measures with a precision of 5 ...

ASM introduces a new, innovative tilt sensor series, PTAM2, with ranges from ±5° to ±180° for single axis and from ±5° to ±60° for dual axes in a robust, IP67/IP69K rated all-metal housing. This industrial grade sensor provides a high resolution, linear output signal that is proportional to the inclination angle. The PTAM2 series has been tested to withstand harsh conditions which makes it suitable...

FUTEK Advanced Sensor Technology, Inc. (FUTEK) has just added the LCB500 Tension & Compression Load Cell to their USB Sensor Solution Line. The new module with USB output eliminates the need for an analog amplifier, power supply, and display equipment making usage that much easier. The plug and play gives you power to monitor the output of the sensor and enjoy measurement and are less affected by...

Comus has updated his vibration modules with a new type. The HS VA01-24D0-1x1-SB, is a sensor that detects vibrations and analyses them to determine if the output should be set high. The vibrations are detected with a very sensitive ball switch that can detect vibrations from 0.3g. The device can easily be set for any application by 2 trimmers. One is for setting the measure interval and the ot...

Spectrum Sensors and Controls introduces a new flange mount, motorized plastic rotary potentiometer only 1.650" in diameter with 45" side located 24 AWG lead wires. The small size and high reliability of this potentiometer make it an ideal missile fin actuator sensor. Spectrum’s flange mount rotary potentiometer has an electrical angle of 50° ±2°, independent linearity of ± 0.25%, bow-tie tolera...

Sensorex Inertial Measurement Unit SX43040 measures rate and acceleration according to 3 axes, and integrates the latest MEMS sensors generation . This IMU belongs to our REDS (Rugged Enhanced Digital Sensors) range, that uses a DCH (Digital Compensation Hybrid) module. Such module enables to considerably improve the sensor performances. Thanks to this technology, SX43040 reaches a very high ac...

DINEL launches an optimum solution for all constructors of packaging machines and handling machines. The Optimum Fork enables : - An economic solution - A simple and robust application - An adaptable solution The new Optimum Fork doesn’t need any setting, it is ready to use so YOU don’t waste any time. It’s a 30 % less expensive solution and faster to install.. This Optimum Fork...

The IO-Link sensor portfolio of the Siemens Industry Automation division now includes a product family of ultrasonic proximity switches. The new Simatic PXS410C sensors in M30 design are available in three converter sizes for large sensing ranges up to ten meters. They are characterized by the high IP67 degree of protection, a significantly reduced blind zone, and a more compact design. Very little...

... Small, Low-Voltage, Versatile Sensors May Help Reduce Manufacturing Costs MINNEAPOLIS, March 9, 2009 – Honeywell (NYSE: HON) today introduced its SS361RT and SS461R Bipolar Latch, Hall-Effect Magnetic Position Sensors, giving customers the opportunity to help reduce manufacturing costs. The SS361RT and SS461R sensors’ enhanced sensitivity enables the u...

The new Balluff module for connecting BTL Micropulse transducers with the P111 interface promises significant time savings in connecting, startup and parameter setting. The splitter box in a rugged metal housing enables direct field bus connection to Profibus. For the user this is not only more efficient, it also allows all the functionalities of the BTL transducer system to be exploited. Plug-a...

IO-Link Masters from Balluff make the intelligence built into sensors and actuators available to the control level. The sensor specialist and connectivity provider now offers a new, space-saving version of their IO-Link distribution box for Profibus. The remarkably slim and rugged zinc die-cast housing with 224x37x32 mm dimensions is equipped with large LED indicator lights. The IP 67 protected ...

A new, rugged, industrial-grade handheld for portable reading and writing of data carriers in the Balluff BIS RFID identification system is available from the sensor specialist and connectivity provider Balluff. The modular, expandable device with IP 65 protection and integrated read/write head stands out with nearly double the read/write distances and 100% compatibility with the BIS L/M and C ...

Balluff will present industrial-grade light designs for their new BVS Vision Sensor at this year’s SPS/IPC/Drives in Nuremberg. The user can choose from different background, spot and ring lights - opening up additional application possibilities. A diffuser providing even light without interfering reflections for applications with reflective surfaces is available for the ring lights. The two f...

Balluff will be introducing a new product line in their series of proven BVS Vision Sensors at SPS/IPC/DRIVES 2008. In addition to the BVS-E series Vision Sensors, which can be conveniently configured from a PC using the ConVis® software, the BVS-C represents a second product line with separate Configurator. It is especially suited for quick and easy retrofitting of machines and equipment. The I...

With their new DeviceNet Analyzer Balluff offers an especially powerful tool for analysis, startup, monitoring and maintenance of DeviceNet/CANbus equipment. These tools are aimed at maintenance personnel, integrators and expert users, in other words anyone who needs verified information about the function status of their DeviceNet system. Preventive maintenance is a particular focus of the DeviceN...

Balluff has introduced a new IO-Link panel module for use and simplified startup in small to mid-size machines and equipment. The panel module is designed for integration in control cabinets. Attached with just four screws, the IP 67 protected module provides four IO-Link ports for IO-Link capable sensors or sensor hubs, enabling efficient and cost-effective cabling using standard cable. Power ...

With the new, space-saving sensor hubs for M8 sensors from Balluff with IO-Link interface, users now can save time and money in installation, maintenance and operation of machines and equipment. The new sensor hub family from Balluff offers a series of typical IO-Link advantages even for non-IO-Link capable M8 sensors, and simplifies modular cabling of machines and equipment. Like the already ...

Balluff series BOS Q08M miniature photoelectric sensors in the rugged, block-style metal housing stand out with their compact form factor and high precision. They are used wherever components of light weight, small footprint and the greatest switching precision are required, such as on robot gripper arms and miniature grippers. New in this mini-photoelectric family is a performance-enhanced thr...

... with a New Mounting Bracket for Most Flexible Installation ASM is introducing its WS31 cable extension sensor series with a new mounting bracket that allows the easy and most flexible installation of the sensor and thus position measurement in almost every direction. The WS31 linear position sensor series offers measuring ranges of 10 and 20 inches and is well suited for many OEM production ...

The brand-new Signum® Supreme series offers high overload protection, is exceptionally rugged-built and resistant, and adapts perfectly to accommodate a number of different ambient conditions in industrial environments. Completely made of stainless steel, the Signum® Supreme features a proprietary monolithic weigh cell that delivers resolutions as high as 350,000 d. All models of the series are av...