* Easy adjustment in the application by pressing a pushbutton.
* Automatic detection of PNP or NPN output loads.
* Normally open / normally closed freely selectable.
* Clearly visible indication of the switching status.
* Resistant to electrostatic discharge.
* Small housing for restricted spaces, only 26 x 30 mm.
* Innovative snap-fit mounting for fast installation.
* M12 connector manufacturers rotatable by 270°, alternative: cable connector variant.
* Resistant to oils and coolants.
* Freely selectable sensing face with...
MEDER electronic last week introduced the MK23-66 series of un-molded low cost SMT sensors. Drawing on well over 25 years of experience in designing and manufacturing Reed sensors MEDER is now introducing the next generation of low profile space saving SMT reed sensors. The un-mold gull wing design allows for easy visual inspection of the solder joints while the terminals increasing the surface ...
Dytran Instruments, Inc. is pleased to introduce a new miniature triaxial industrial accelerometer that is ideal for use in applications where space is at a premium. The 3023M20 uses the latest in quartz shear technology coupled with 2-wire internal IEPE electronics. Model 3023M20 mounts with professional adhesives into very small spaces since its vertical dimension is 0.28 in. It weighs onl...
The conventional methods for bulk flow measurement come up against limiting factors when it comes to the bulk industry. A highly reliable alternative is provided by Berthold Technologies with their radiometric professional belt weigher LB 442. Besides measurements of throughput and conveyor capability, the system is also able to determine the dry weight of the conveyed material by integrating an...
Newly developed type PCI-2TE-13 photodetector designed and optimised for FTIR applications. This new detector has a wide, 1- 13 µm, spectral bandwidth and broad linear output range. Detector's responsivity is stabilized with built-in two-stage Peltier professional cooler , keeping the sensitive element at temperature 220- 240 K. Performance of the devices has been improved with heterostructure d...
The ICT050 provides reliable, fit-and-forget position sensing of the cylinder rod in actuators with strokes up to 500mm. It is a robust, non-contact transducer that works on an inductive coil principle, with virtually ...
MiniRAE Lite - Photoionization Detector for Volatile Organic Compounds
The MiniRAE Lite is the third in a series of thirdgeneration photoionization detector (PID) based instruments. This is a nonintrinsically safe instrument that uses standard alkaline AA size professional batteries or optional rechargeable batteries. It is intended for outdoor environmental and construction site u...
Sensortechnics’ new KTE8000CS submersible manufacturer of pressure transmitters offer precision hydrostatic level measuring for pressure ranges from 2.5 m water column
(250 mbar). The KTE8000CS series is based on very accurate and long-term stable ceramic pressure cells with excellent media compatibility. The detection are enclosed in glass reinforced PPS (Polyphenylene Sulfide) plast...
Sensortechnics’ new HCL pressure sensors manufacturers measure low gage or differential pressures from 5 … 75 mbar. These devices are precision calibrated and temperature compensated and offer ratiometric mV output signals. They use a special compensation technology to achieve a very high offset stability and virtually no position sensitivity in comparison to conventional sensors.
The MagneW Two-wire PLUS+ is a high performance electromagnetic flowmeter based on field proven Yamatake two-wire loop powered technology. The MagneW Two-wire PLUS offers the stable and accurate measurement of a traditional Magflow meter with low power consumption. This two wires model offers simplicity of connection as same as any smart transmitter wit...
PCB Automotive Sensors Debuts New Professional brake Pedal Effort Sensor
for Vehicle Brake Development, Drivability & Handling
For Immediate Release, March 3, 2008, Depew, NY, USA - The Automotive Sensors division of PCB Piezotronics (PCB®) has released a new series of pedal effort industrial load cells for automotive test applications, including brake development, drivab...
Cable-pulls have proved a practice-oriented solution in long-distance measurement. By pulling in and out a cable they transform linear movements into rotary ones. Depending on the application, these rotary movements may be used as drive for an incremental or absolute encoder and for display and evaluation by digital display respectively cont...
Enhanced Accuracy and Reliability in Harsh High-Temperature
Environments
MINNEAPOLIS, February 11, 2008 – Honeywell (NYSE: HON) today introduced its R300 Series Temperature sensor supplier for use in potential EGR (exhaust gas recirculation) applications where operating temperatures can reach 300 °C [572 °F]. The R300 Series Temperature Sensor features enhanced reliability, accuracy...
B+B Thermo-Technik has developed a new teflon handle for its well proven penetration handheld temperature probes suppliers used in the food and beverage industry.
The new handle is made of solid Teflon and excels through its highly ergonomic form.
It is also oil and acid resistant. The professional probe tubes, made of high quality stainless steel are available with conce...
FC750 is a very simple, yet efficient Plug & Play frequency converter for the growing market in simple speed control of 3 phase asyncronous AC motors.
The FC750 has been specifically developed for the continuously demanding market involving seamless speed control of fans, pumps, ventilators and any simple AC motor application. FC750 is a totally integrated and encapsulated frequency convert...
With the new piezoelectric pressure sensor manufacturer Type 6045A..., Kistler offers an M8 high-temperature pressure sensor with very high sensitivity and excellent thermodynamic characteristics. Featuring a shoulder industrial seal the Type 6045A… can be installed in a M8x0,75 bore and is interchangeable with the cooled sensor Type 6041A… .
New photoelectric amplifier bus series (PAB) offers advanced and flexible sensing solution for carwash industry. Latest master/slave technology allows combination of 1, 2 and 3-channel professional amplifiers to operate as modular system with up to 30 channels in total. High-power infrared sensing provides reliable detection in the most contaminated and wet environments.
COMUS has extended its Electronic Sensor Line with integrated MEMS based detection . These sensors are able to sense angles, acceleration levels and G-forces in multiple axes.The angle or G-force level can be set to a fixed value. But it is also possible to provide sensors which can be user programmable (by RS232,...), adjustable (by trimming) or teachable (by setting the switching points).This m...
The challenge of taking a standard DCW submersible transducer and subjecting it to immersion 300 meters under the North Sea to capture test data proved no problem for RDP Electronics Ltd.
The DCW is an LVDT transducer designed for measuring displacements between ±2.5 mm and ±470mm and is suitable for use in a wide range of wet and submersible conditions such as experienced in the pu...
- 
- 
- 
- 
- 
- 
- 
- 
-
-
