Erie, Pa.—Eriez® announces the availability of a free guide that showcases the company’s innovative E-Z Tec® 9100 Professional metal detector . According to the literature, this metal detector offers incredibly high sensitivity, making it an ideal choice for the chemicals, plastics, recycling and rubber industries.
The literature highlights the advantages of the E-Z Tec 9100, incl...
The Model QSFK-9 torque detection from RDP Electronics is well suited to low volume testing in research and equally at home for setting or checking torque values in production. Typical applications include torsional fatigue and motor testing in research and development, or component testing and torsional tightening in production environments.
The QSFK-9 is designed to achieve a higher tor...
Turck adds plug & play I/O module to the BL ident system, roller conveyor write-read head with bulk detection and new data tags
06/08 – March 18, 2008
Turck is expanding its high temperature RFID system BL ident with a host of new innovations. At the Hannover Fair, the company will be presenting an RFID I/O module for simple plug & play connection to all commonly used control...
Kistler’s torque sensors of type 4503A… can measure both peak and average operating torques with a high degree of accuracy. Extreme ratios of high peak to moderate operating torque arise, for example, during starting and abrupt deceleration or braking of presses and elevators. Torsional vibration encountered in combustion engines, pumps and compressors, etc., also often leads to unwanted peak loads...
The DYXIM X-ray testing systems from Sartorius detect a variety of contaminants
X-ray inspection systems are playing an increasingly significant role in quality assurance in the production of food, cosmetics and pharmaceuticals. The DYXIM series enables users to check packed and unpacked products for the presence of various contaminants such as glass, metal, rock, bones or other pa...
Bethlehem, PA – March 2008 —GOW-MAC® Instrument Co. provides a replacement thermal conductivity detector (TCDs) for the HP 5890A or 5890 Series II gas chromatograph (GC). Each detector comes ready to install in an existing HP 5890 GC. The detector is made of stainless steel and comes with a single, rhenium-tungsten (WX) filament as standard (heaters and RTD not included). Corrosion resistant nickel...
FUTEK Advanced Sensor Technology, Inc. (www.futek.com) can now provide its fatigue rated version of Pancake Load batteries LCF550 in 2.0 mV/V output. These load cells are primarily used in inline applications on actuators suppliers or threaded assembles. FUTEK currently carries these models in 1.0 mV/V output as a standard but can provide the new 2.0 mV/V output per request. Engineering Manager...
WORLD-BEAM® Q20 Sensors are the newest addition to Banner’s WORLD-BEAM® family of cost-effective, rugged and powerful photoelectric sensors manufacturers . The Q20 delivers a host of sensing modes in a durable, IP67-sealed housing with industry-standard 25.4 mm mounting. With a water-tight, small rectangular housing and exceptional optical range, the Q20 provides high-performance, reliable sensing...
Turck introduces IP67 interconnections for the quick-connect system
Turck has added connector versions with premoulded cables to its M12 quick-connect system. Having recently presented the female connector, the specialist in sensor, field network , interface and connection technology will be presenting straight or angled versions of the corresponding male connector at the Hannove...
Compact analogue sensor with a 45 mm measuring range supplies a linear output signal with high precision
Turck has added a compact version with an analogue output to its range of special detection for pneumatic cylinders manufacturers . The WIM45-UNTL model allows the position of the piston between the ends of the professional cylinder to be determined at any time so that penet...
Rugged sensor solution replaces expensive optical testing procedure in sheet metal working
Turck's new sensor for the detection of weld nuts and spacer sleeves offers a safe and inexpensive alternative to previously used optical testing procedures. The sensor is surrounded by a stainless steel centering sleeve that offers mechanical protection whilst holding the nuts and sleeves at ...
Efficient background suppression and optimum EMC performance allow reliable use in the most demanding application fields
Turck has extended its range of capacitive sensors . The specialist in sensor, field bus , interface and connection technology is now also offering a fully encapsulated BCF10 Q20L60 rectangular model with cable or M12 interconnector output. The new BCF...
Anton Paar, leading manufacturer of analytical instruments for the laboratory and process presents specialized products for the terminal and distribution market at the STOCEXPO 2008 in Rotterdam in booth 48 to 55.
The new online density meter for terminals – compact, accurate and low cost:
RECHNER Capacitive detectors can make a major contribution to the trouble free functioning of your pellet heating system. RECHNER sensors control both the supply of the pellets to the professional burner and the level of the storage unit. Different models are available in M18, M30 and M32 housings with metal or plastic bodies. Change of the material properties of the pellets, are no problem for...
RECHNER has had a history of success with capacitive Mini’s going back to 1983 with disk-shaped Detection for wafer detection. No sooner had this project finished and our clients set us new challenges, and within a few months Rechner had an extensive product family of capacitive mini sensors. Time has not stood industrial still in this product area and as a result of constant advancement and te...
Turck is the first supplier to present 2-wire DC sensors without reduction factor
Turck has extended the uprox+ sensor family with a Factor 1 sensor version in 2-wire DC technology. The inductive 2-wire technology is of special interest for machine engineers, who sell to Japan, France and the USA, as this type of sensor is mostly applied in these countries. Moreover, mechanic...
28.02.2008 Vouvry (Switzerland): A lot of process control applications need to react to level detection. In order to offer an easy way to trigger a signal as an input for a SUPPLIER OF PLC or even switch power directly once a certain liquid level is reached, Microprecision electronics added a floater actuator manufacturer to its successful V3 size MP300 switch series.
A floating polyprop...
Conax Technologies has a line of high reliability Exhaust Gas Manufacturers of thermocouples to retrofit various frame size gas turbine engines. These detection are engineered and manufactured specifically to provide longer sensor life than the original equipment. The thermocouples are designed to mate with OEM radiation shields and are very cost effective to retrofit.
March 11, 2008 – Depew, NY, USA – The Automotive Detection division of PCB Piezotronics (PCB®) has announced release of a new high-temperature preamplifier, designed to overcome high temperature testing challenges associated with NVH powertrain and vehicle underhood testing applications, and to broaden options for NVH test engineers...
The new industrial encoders series EM/EMA by the Italian company ELAP S.p.A. (www.elap.it) operate according to the magnetic principle: the rotation of a permanent magnet placed on the encoder shaft generates a sinusoidal magnetic field on 360 degrees. The electronic circuitry provides as output the absolute position and incremental pulses.
-
-
-
-
-
-
-
- 
-
-
