Compared to conventional LED diffuse sensors, industrial laser models feature improved accuracy. As a result, the professional switch point of the new Contrinex devices can be accurately set at any point within the whole setting range of 40 ... 250 mm or 60 ... 600 mm. The narrowly focussed laser beam permits the detection of smallest objects (down to 0.1 mm). The diffuse sensors are built int...
The all-metal sensors in size M8 for embeddable and non-embeddable mounting are now also available with S12 interconnection . These inductive Contrinex devices feature a one-piece stainless-steel housing, thus eliminating the most important weak spot of conventional sensors, i.e. the normally relatively fragile plastic sensing face. As a result, these devices are mechanically and chemically very r...
The family of modern STCC-04 controllers has been designed for temperature control and stabilization of the IR detectors manufactured by VIGO System S.A. The following TE cooled detectors are included: PVI-2TE, PV-2TE, PC-2TE and PCI-2TE mounted on the heatsinks DR-1(B) or DR-10(B).
The STCC-04 family is characterized not only by a very good stabilization of the detector temperatur...
The MTCC-01 miniature TE professional cooler controller is designed to temperature control of 2- or 3-stage TE cooled IR detectors. MTCC-01 can be used with the Integrated Detector / Preamplifier Module MIPAC, MIPDC, MVPAC & MVPDC series. This controller offers variable adjustment of temperature from 220 to 255K (covered by temperature sub ranges).
Conax Technologies offers an array of RTD and Type T thermocouple assemblies with stainless steel sanitary flanges for quick mounting and easy sensor changeovers in temperature monitoring and product validation applications.
Several termination head styles are available, including screw-top stainless steel heads (T5SS) and FDA-approved white plastic heads in screw-top (T13) and fli...
Sensortechnics’ introduces the new OLP series of miniature optical liquid level switches. These very cost-effective point level sensors measure the presence or absence of liquid in a wide range of OEM applications.
The optical OLP switches use solid state technology with no moving parts for highly accurate and reliable measurements. The product range offers basic devices with analog ...
Sensortechnics’ new HCA Baro series offers OEM customers high precision barometric pressure measurement with simultaneous digital and analog output signals. They comply with the I2C bus protocol and can directly communicate with microcontrollers or microprocessors. Custom specific outputs, SPI bus or switching outputs are available on request.
In harsh environments where non contact speed sensing and control are required, for example to control the slip of AC induction motors, the measurement resolution is usually derived from the number of gear teeth of the target. In many cases the desired resolution is higher than the diameter of the pole wheel and the minimum size of the module would allow. The new DSI family of speed sensor from Swi...
... Surface-Mount Capability Added
for High-Volume Applications
Honeywell (NYSE: HON) today introduced its HIH-4030 and HIH-4031 Series Moisture sensors with surface mount capability. An addition to the HIH series of humidity sensors, the 4030/31 series is available in tape and reel packaging for use in high-volume, automat...
Bestact can do it up to about 50VA directly and is the most suitable for valve switches such as AC solenoids. It means that Bestact can perform functions of both conventional reed switches and mechanical power relays. But that is not all.
By using a single Bestact, the reliability rises significantly; circuit wering becomes simpler eliminating the need of contact protection circuitr...
The RC Si M30 IP 69K is a magnetic safety sensor in a cylindrical enclosure developed by steute especially for the use in hygienic areas of the food processing industry. Sensor and actuator manufacturers are housed in a stainless steel enclosure and the special sealing system which enables the regular treatment of the safety switchgear to a high-pressure professional hose at water pressures o...
Conax Technologies’ Roll Temp Sensor Assemblies provide accurate monitoring of surface temperatures on professional drums , professional rollers or other moving surfaces. They are ideal for detecting temperature variations in continuous process applications, such as plastic-film processing, wire manufacturing and painting processes. Roll Temp Detection provide a continuous flow of accurate ...
Sensor reliability is a critical issue in many applications. All capacitive and eddy-current noncontact detection from Lion Precision will carry a two-year warranty beginning June 1, 2007. The change results from recent investigations showing that the company’s general sensor lines have lower failure rates than their market-leading LRD line of professional label sensors which has always carried...
The Lion Precision Spindle Error Professional analyzer has adopted the National Instruments USB-6251 Multifunction DAQ as its data acquisition solution. Previously, 20-30% of sales engineers’ support time was spent helping users install PCI or PCMCIA plug-in DAQ cards. The USB-6251 has eliminated the vast majority of that support time and made life considerably easier for Spindle Error Analyzer...
The new Targa III Dynamic Runout instrument measures runout on high-speed spindles at speeds up to 300,000 RPM. Printed circuit board and other
high-speed drilling operations require extremely low runout to prevent tool
breakage leading to part failure. Static spindle runout, measured with a
dial indicator while the spindle is turned by hand, may have very little
correla...
This series of rotary transducers has been designedly developed by ELCIS for those projects needing simultaneous information supplied by encoder and tacho generator. For this reason, an incremental encoder and a tacho generator are housed in a single unit.
Tacho professional generators manufacturer by primary firms may be installed on the encoder: tacho generator model and manufacturer...
ELCIS is glad to present, further to its wide range of absolute encoders , its line “9”, high quality transducers with high resolution: up to 16 bit for the single turn version and up to 30 bit for the multi turn version.
Our new line includes about fifteen models sized from Ø 58mm to Ø 115mm with the following mechanical characteristics:
- industrial encoders Ø 58mm, se...
*Easy switch point setting using two setting rings for optimum readability.
*Excellent response time: T05 = 1 s and T09 = 3 s.
*Mechanical locking prevents inadvertent manipulation.
*Switch points freely adjustable from -25 °C to 140 °C.
“No need for setting by an expert.”
The first switching temperature sensor suppliers with intuitive handling, combined...
HAMPTON, VA. September 28, 2007-Teledyne Hastings Instruments (THI), a business unit of Teledyne Instruments, will introduce a new family of mass flow meters designed for the industrial gas market. The HFM-I-400 Series will be available for purchase on October 2 at the ISA Expo 2007. THI, an ISO 9001:2000 certified manufacturer, produces a complete line of instruments for precise measurement and c...
The SpacePak series consists of a thru beam system; a diffuse proximity sensor ; a retro reflective sensor; a polarised retro reflective sensor and a background suppression sensor.
The proximity and background suppression detection , in order to meet market requirements, are now both available with an increased range. The range of the SPP (proximity sensor) has been increased fr...
- 
- 
- 
- 
- 
- 
- 
- 
-
-
-
