In harsh environments where non contact speed sensing and control are required, for example to control the slip of AC induction motors, the measurement resolution is usually derived from the number of gear teeth of the target. In many cases the desired resolution is higher than the diameter of the pole wheel and the minimum size of the module would allow. The new DSI family of speed sensor from Swi...
... Surface-Mount Capability Added
for High-Volume Applications
Honeywell (NYSE: HON) today introduced its HIH-4030 and HIH-4031 Series Humidity detection with surface mount capability. An addition to the HIH series of humidity sensors, the 4030/31 series is available in tape and reel packaging for use in high-volume, autom...
Bestact can do it up to about 50VA directly and is the most suitable for valve switches such as AC solenoids. It means that Bestact can perform functions of both conventional reed switches and mechanical power relays. But that is not all.
By using a single Bestact, the reliability rises significantly; circuit wering becomes simpler eliminating the need of contact protection circuitr...
The RC Si M30 IP 69K is a magnetic protective sensor in a cylindrical enclosure developed by steute especially for the use in hygienic areas of the food processing industry. Sensor and actuator manufacturer are housed in a stainless steel enclosure and the special sealing system which enables the regular treatment of the safety switchgear to a high-pressure professional hose at water pressure...
Conax Technologies’ Roll Temp Sensor Assemblies provide accurate monitoring of surface temperatures on professional drums , professional rollers or other moving surfaces. They are ideal for detecting temperature variations in continuous process applications, such as plastic-film processing, wire manufacturing and painting processes. Roll Temp Detection provide a continuous flow of accurate ...
Sensor reliability is a critical issue in many applications. All capacitive and eddy-current noncontact detection from Lion Precision will carry a two-year warranty beginning June 1, 2007. The change results from recent investigations showing that the company’s general sensor lines have lower failure rates than their market-leading LRD line of professional label sensors which has always carried...
The Lion Precision Spindle Error Professional analyzer has adopted the National Instruments USB-6251 Multifunction DAQ as its data acquisition solution. Previously, 20-30% of sales engineers’ support time was spent helping users install PCI or PCMCIA plug-in DAQ cards. The USB-6251 has eliminated the vast majority of that support time and made life considerably easier for Spindle Error Analyzer...
The new Targa III Dynamic Runout instrument measures runout on high-speed spindles at speeds up to 300,000 RPM. Printed circuit board and other
high-speed drilling operations require extremely low runout to prevent tool
breakage leading to part failure. Static spindle runout, measured with a
dial indicator while the spindle is turned by hand, may have very little
correla...
This series of rotary transducers has been designedly developed by ELCIS for those projects needing simultaneous information supplied by encoder and tacho generator. For this reason, an incremental encoder and a tacho generator are housed in a single unit.
Tacho professional generators manufacturer by primary firms may be installed on the encoder: tacho generator model and manufacturer...
ELCIS is glad to present, further to its wide range of absolute encoders, its line “9”, high quality transducers with high resolution: up to 16 bit for the single turn version and up to 30 bit for the multi turn version.
Our new line includes about fifteen models sized from Ø 58mm to Ø 115mm with the following mechanical characteristics:
- encoders Ø 58mm, several fixing flan...
*Easy switch point setting using two setting rings for optimum readability.
*Excellent response time: T05 = 1 s and T09 = 3 s.
*Mechanical locking prevents inadvertent manipulation.
*Switch points freely adjustable from -25 °C to 140 °C.
“No need for setting by an expert.”
The first switching temperature sensor with intuitive handling, combined with an e...
HAMPTON, VA. September 28, 2007-Teledyne Hastings Instruments (THI), a business unit of Teledyne Instruments, will introduce a new family of mass flow meters designed for the industrial gas market. The HFM-I-400 Series will be available for purchase on October 2 at the ISA Expo 2007. THI, an ISO 9001:2000 certified manufacturer, produces a complete line of instruments for precise measurement and c...
The SpacePak series consists of a thru beam system; a diffuse proximity sensor suppliers ; a retro reflective sensor; a polarised retro reflective sensor and a background suppression sensor.
The proximity and background suppression detection , in order to meet market requirements, are now both available with an increased range. The range of the SPP (proximity sensor) has been in...
Comus International offers a new Tip-Over Switch as an innovative design, which allows the control of high power up to 1500 W. This switch is ideal for industrial process monitoring applications requiring high repeatability and insensitivity to low frequency mechanical vibration. The switch is easy to install on any horizontal surface. Per customer requirements the switch can have NO or NC contact ...
The Ashcroft® XmitrTM combines our trusted pressure gauge with patented transducer technology for a product
of exceptional value and functionality.
In applications where both a gauge and transducer are currently being used, the XmitrTM provides the user with
money, space and time savings. It eliminates one instrument and the associated ...
Cleveland, September 20, 2007 – EMX Industries Inc., a manufacturer of sensors for automation, introduces the CMYX color mark sensor. It is the fastest sensor on the market, capable of detecting 0.5mm PHARMA-CODE at speeds of 2000ft/min. Standard size color marks are detected at speeds exceeding 10,000 ft/min. A round 0.4mm light spot provides for high resolution and flexible mounting. High contra...
Toronto, September 14, 2007 - Optech Incorporated is proud to announce the launch of the LYNX Mobile Mapper. Over three years in development, the LYNX Mobile Mapper represents the next generation of lidar technology. The lidar is bundled into a mobile mapping solution with the accuracy, robustness and support that Optech users have come to expect.
Adept Technology Inc of Livermore, California, USA, a provider of intelligent vision-guided robotics and global robotics services, has signed a licensing agreement with LMI Technologies Inc, a developer of vision sensor technology, based in Canada.
Under the terms of the agreement, Adept will provide LMI with a license for its HexSight professional software and trademark. This will all...
RAYTEK has introduced the new Raytek XR infrared (IR) thermometer. Designed to optimize continuous temperature monitoring in a broad range of manufacturing processes, this advanced sensor is a rugged, IP65 sealed single-piece system with the flexibility to handle almost any application. The Raytek XR thermometer combines a host of best-in-class features, including multiple extended temperature ran...
SCAIME has combined its know-how in strain gauge load cells to the latest digital technology innovations in order to provide a new high performance digital compression load cell.
The integration of analog-to-digital conversion into the CB50X-DL load cell offers clear advantages over a conventional analogical solution:
· Suppression of load cells sensitivity balance (corner ca...
- 
- 
- 
- 
- 
- 
- 
- 
-
-
- 