To ensure maximum safety and availability of mobile machines, MTS has developed the redundant position sensor manufacturer Temposonics® MT. It offers optimum safety of the measurement – an important factor wherever failure could have high effects on safety and cost, e.g. with steering cylinders or booms.
Thanks to the sensor professional housing ’s reduced diameter of 48 mm the re...
April 25, 2008 (Chatsworth, CA) – Dytran Instruments, Inc. announces that they have received their ISO/IEC 17025:2005 certification from the American Association for Laboratory Accreditation (A2LA). This standard is the single most important metrology standard for test and metering .
In achieving this standard, all calibrations performed by Dytran are recognized as valid and repe...
up to 600 bar, resp. with metallic membrane up to 1000 bar
Precision 0,5%, 4-digit Led display
2 PNP switching outputs, analogue output 4...20mA
Advantages
- Pressure gauging from -1 to 1000 bar
- Ceramic or metallic membrane for various applications
- Suitable for wide process temperature range from -40°C to +125 °C
- Comfortable operat...
The U002 ultrasonic suppliers of level switch provides low cost, solid state switching for most any liquid without a float or other moving parts. The ultrasonic probe detects the absence or presence of fluid between two piezo-electric crystals sealed within the sensor gap to provide a relay or loop powered current shift (8 mA to 16mA) output in any orientation.
Chemical Processing, Solvent Extraction, Drying Processes, Paint cabin Systems
With a highly responsive ultraviolet (UV) flame sensor and advanced signal processing, the new high-temperature FL3111HT UV Flame detector from General Professional monitors operates in...
Turck is now offering rugged detection with e1 type approval for use in utility vehicles
Turck has developed a new series of inductive sensors that are specially tailored to the harsh requirements of mobile applications in utility vehicles. High switching distances and rugged housings, together with an optimised application electronics unit and state-of-the-art production techno...
These devices certified ACS (Certificate of Sanitary Conformity) have been designed for use in the treatment of drinking water meant for human consumption and comply with the XP P 41-250 (1-2-3) regulation. The ACS float level contactor has the same use and installation of the SOBA.
Once again, ATMI is the first manufacturer capable to offer a new kind of certified device. We are pr...
Now you can get our Load battery Interface Card model LCIC-WIM with embedded software to weigh trucks & trains in motion for slow and high speed WIM.
The on-board powerful PROFESSIONAL DSP processor running our advanced algorithm, makes all necessary professional filters and calculates on-the-fly the Weight, Speed and Distance between axles while the calculated values are bei...
Wilcoxon Research adds a displacement sensor to its popular PC420 Series of 4-20 mA vibration transducers . The PC420D is the first IEPE displacement detector and 4-20 mA vibration professional transmitter packaged as a single sensor. The PC420D sensor outputs a 4-20 mA signal based on the displacement level of the machine vibration. The 4-20 mA output is determined by first measuring the pe...
...air quality signal ensures fresh air in the classroom
If pupils are conspicuously tired during lessons, lack concentration or fidget around, it is due to stuffy classroom air caused by poor ventilation or the lack of it. This has now been confirmed by a study carried out at Bremen University under the leadership of Dr. Gerhart Tiesler. The scientists measured the carbon dioxide co...
The LM10 linear magnetic encoder brings 100 m travel and fit-and-forget reliability to demanding high-speed, precision applications. The solid-state, non-contact design features a compact IP68 rated readhead that rides at up to 1.5 mm from the self professional adhesive magnetic strip scale.
The non-contact magnetic sensing delivers reliability in applications too dusty, dirty, gr...
PCB Automotive Sensors Debuts High Sensitivity, High G Shock
Triaxial DC Response Accelerometer for NVH, Brake Deceleration Compliance,
Vehicle Durability and Roll Stiffness/Static Rollover Testing
The Automotive Sensors division of PCB Piezotronics (PCB®) has announced the debut of a series of high sensitivity, DC response triaxial suppliers of accelerometers , ide...
Resolution per revolution : 16 BIT (65536 counts)
Nb of revolutions : 16
Total resolution : 20 BIT
Accuracy : ± 40'' (± 10'' in option)
Output : Bus CAN OPEN
Output Interface : RS422 Power supply manufacturers / consumption : OV ; + 28V ± 10% (200 mA max)
Operating temperature :
- Standard : from - 30°C to + 70°C
- Optionnal : from -...
... HG1171 Series Enhances Safety, Stability, Productivity, and
Operational Capabilities of Heavy-Duty Vehicle Equipment
MINNEAPOLIS, April 14, 2008 – Honeywell (NYSE: HON) today introduced its HG1171 Series 6DF IMU sensor which is designed to provide key data for automated steering, stability, and vehicle controls in a variety of potential agricultural, co...
The PA 11 is a 1-channel photoelectric professional amplifier to be used with 1 set of remote sensors.
The Telco remote industrial transmitter (LT) and receiver (LR) sensors in combination with the Telco Photo Amplifier PA 11 will operate problem free through steam, oil, grease, water, fog, dirt and most other contaminations that would cause ordinary ir sensors to fail.
...
The new Ashcroft® GC51 and GC52 gauge and differential suppliers of pressure transmitters offer the ideal economical alternative to network process professional transmitters when a digital protocol is not required. The innovative design features an ultra-compact NEMA 4X/IP65 enclosure measuring only 2.65” in diameter. Stainless steel wetted parts accommodate either wet or dry media. The GC51 is...
In December 2007 LMI was awarded the 2007 North American Professional laser Based 3D Vision detection Technology Innovation Award by Frost & Sullivan (F&S).
LMI was selected by the F&S analyst team currently tracking technology innovation in key hi-tech markets. LMI was chosen for the 2007 award for exhibiting technology advancement from 2D vision to 3D, based on the number of i...
The new Dytran 3255A and 3256A series single axis accelerometers are excellent cost effective solutions for general purpose vibration applications. The 3255A features a side 10-32 connector suppliers and the 3256A has a top 10-32 connector. Both models have ultra low noise JFET electronics, wide bandwidth, all titanium construction, and are available in sensitivities of 10mV/g, 100mV/g and 500m...
RDP Temposonics-RD4 sensors have been designed for installation into hydraulic cylinders and are ideal for clevis head cylinders, or any space restricted application.
New developments of an existing successful product means that now the electronics can be a short cable length away from the sensor vastly reducing the size of the sensor head and enabling it to fit into many more cylinders. ...
The M5 piezoresistive pressure sensor manufacturers , Type 4007B..., is designed for measuring absolute pressures in engines at operating temperatures from –40 to 200 °C. As a direct chip exposure (DCE) sensor with no protective steel diaphragm it is directly exposed to the medium. The piezoresistive silicon measuring element is positioned behind a shield and protected by a coating. A special coat...
- 
- 
- 
- 
- 
- 
- 
- 
-
-
