218 press releases : Electricity: Power supplies, Generators, Transformers…



Releases  181 -200
Date 2008-12-12 HIMOINSA HIMOINSA. Generating sets specially designed for the telecommunications market.

HIMOINSA. Generating sets specially designed for the telecommunications market.

HIMOINSA has developed a range of generating sets specially designed for the telecommunications market. Among many remarkable characteristics toughness for the inclemency of the weather can be highlighted. These generating sets are manufactured to be out in the open in isolated places where mobile telephony towers and boosters are placed. Another key characteristic which makes these HYW range gen...


Date 2008-12-12 HIMOINSA Ready to rent

Ready to rent

HIMOINSA has developed a new range called HR (Ready to Rent) for work in extreme working conditions. This new range has been specially designed and manufactured for the rental sector. It shows great versatility, standardization, innovation and continuous improvement. H_Rent has been thought as a different product from the professional range (which already complied with needs of the rental secto...


Date 2008-11-28 ALPI ALPI at the SCS Automation Paris 2008 fair

ALPI at the SCS Automation Paris 2008 fair

From the 2nd to 5th of December, ALPI will present its latest release. Visit us Hall 6 Stand J068 Discover our Caneco softwares range: -Caneco BT (low voltage calculation & schematics) version 5.3 -Caneco Implantation (electrical devices and cables layout) -Caneco HT (high voltage calculation & schematics)


Date 2008-11-20 CIRCUTOR STANDARD / PLUS, CIRCUTOR'S NEW GENERATION of capacitor

STANDARD / PLUS, CIRCUTOR'S NEW GENERATION of capacitor

STANDARD capacitor banks CIRCUTOR's new STANDARD capacitor banks series has been designed for customers who wish to carry out the traditional compensation process, measuring a single-phase, but who need to install a robust unit, with a simple and intuitive programming system. The new STANDARD series offers: • The widest and most competitive range of products in the market. • More than 200 un...


Date 2008-11-18 SAFT Saft launches its latest developments in primary lithium battery technology

Saft launches its latest developments in primary lithium battery technology

Munich, November 7, 2008 - Saft, world specialist in the design and manufacture of high batteries for industry, is presenting two new developments in lithium battery technology for electronics applications at Electronica 2008. They are: the LS 14500 primary lithium cell - now upgraded to offer a best in class capacity of 2.6 Ah and the MP 176065 HD Integration - a new very high drain version of the...


Date 2008-11-18 SAFT Saft launches its latest developments in rechargeable lithium battery technology

Saft launches its latest developments in rechargeable lithium battery technology

Munich, November 7, 2008 - Saft, world specialist in the design and manufacture of high batteries for industry, is presenting two new developments in lithium battery technology for electronics applications at Electronica 2008 including the MP 176065 HD Integration - a new very high drain version of the MP Integration series rechargeable Li-ion (lithium-ion) cells. Saft has extended its existing ...


Date 2008-11-18 APEM New sealed pushbuttons with dia.16 mm bushing - IR series

New sealed pushbuttons with dia.16 mm bushing - IR series

APEM has expanded the “I” range of sealed miniature pushbuttons with the introduction of a new dia. 16 mm pushbutton series. The IR series is divided into 2 families: standard models and micro-switch technology models. The standard models include numerous terminal options: solder, flying lead, straight PC, quick-connect, but also screw. The screw terminal version, unique on the market for this t...


Date 2008-11-06 Peppers Cable Glands "It's all about the experience"

"It's all about the experience"

For over 60 years have been involved in the manufacture and sale of Cable Glands, giving the company a wealth of experience and expertise within the industry. Operating from its UK base in Surrey they run a very unique and efficient satellite manufacturing system using group companies situated in the North, the industrial heartland of England. This provides an assured supply chain and when pair...


Date 2008-11-04 Kinto Electrical Apparatus Flexible insulated busbars

Flexible insulated busbars

KINTO is the leading supplier in China for manufacturing of flexible insulated busbars, which consist of several layers of uncoated or tinned copper strips and are insulated with flexible high quality PVC compound. The main features of flexible insulated busbars: - Easy assembly. - Possibility of reducing sizes of the equipment. - The bending-radius could be smaller than that of normal cable ...


Date 2008-11-04 Kinto Electrical Apparatus Mechanical parts and components for switchgears

Mechanical parts and components for switchgears

KINTO Electrical Apparatus Co., Ltd. is a China based company specialized in providing copper and mechanical parts and components for switchgears. The title picture shows a draw-out unit for a new type switchgear. We have advanced production machines and testing equipments to assure high quality of the products.


Date 2008-11-04 HUBER SUHNER RF Products SUCOFLEX 400 revolutionary

SUCOFLEX 400 revolutionary

Thanks to a new, extruded ultra low density PTFE dielectric, with a dielectric constant (εr) of 1.26, the microwave cable generation SUCOFLEX 400 has what is currently the lowest insertion loss overall. Despite the high air proportion, however, the proven mechanical stability and reliability of the extruded dielectric has been preserved. Another highlight of the very low dielectric constant...


Date 2008-10-30 Zentro-Elektrik Microcontroller based digital DC/DC converter

Microcontroller based digital DC/DC converter

The models of the GWHD500 series have been provided with a lot of intelligence by using two 16-bit digital signal processors (DSP). The use of two communicating DSPs does not only permit the digital control of the output voltage or the output current, respectively, but in addition digital signalling in the inverse feedback using digital magnetic couplers instead of conventional opto-couplers. In th...


Date 2008-10-30 Zentro-Elektrik AC/DC Power supplies / battery chargers

AC/DC Power supplies / battery chargers

With the ZAT800-3000 series, Zentro-Elektrik offers power supplies with outputs of 800 W, 1,600 W and 3,000 W. Wide-range input from 70 … 264 VAC or 70 … 369 VDC and wide-range output depending on the nominal output voltage of 0 … 18 VDC to 0 …320 VDC, 0 … 5 VDC analogue interface, temperature compensated charge, sense line (option), power fail alarm, master slave operation with RS232 bus … onl...


Date 2008-10-27 Ferraz Shawmut New offering of NH fuse-switch-disconnector

New offering of NH fuse-switch-disconnector

MULTIBLOC is the brand name of our horizontal and vertical fuse-switch-disconnector. They are designed for square-bodied and blade NH fuse links compying with IEC 60269-2. MULTIBLOC is a modular system allowing the installation and combination of individual components. Installation and maintenance are as per IEC 60947-1 and -3. MULTIBLOC devices are designed for load switching, disconnection, pro...


Date 2008-10-24 Fusit S.r.l. FUSIT S.r.l.

FUSIT S.r.l.

FUSIT was founded in 1968 to manufacture and sell fuses, fuseholders and gas discharge arresters. Enthusiasm, expertise, advanced technologies and endless investments in R&D, brought FUSIT to a leading role in the world of the circuit protection. Since 1985 FUSIT has improved its own activities becoming a specialist stock representative company, combining manufacturing and sales background FUS...


Date 2008-10-22 cefem Visible cut-off switch in POLY-M enclosure

Visible cut-off switch in POLY-M enclosure

In industrial environment, where risk is permanent, local control can reduce accidents. CEFEM offers its POLY-M range, a visible cut-off switch mounted in a polycarbonate box. The “visible" cut is the clear and sharp vision of knives. The switch position is 100% guaranteed at one glance. This enclosure is IP55, it is indifferent to corrosion and requires no maintenance. The indoor facility ...


Date 2008-10-20 Ebo Systems Ebo Systems GRP / FRP costs less than HDG trays !

Ebo Systems GRP / FRP costs less than HDG trays !

It is a common story, like if it was so difficult to learn from past mistakes… Although it is true that Hot Deep Galvanized (HDG) cable trays looks like being more economical than Ebo Systems fiberglass, because their acquisition price is lower, time can in many case, prove the contrary. The projects that those trays and ladders are in most cases going into are industrial or infrastructure ...


Date 2008-10-14 APEM Industrial Joysticks - APEM acquires CH Products

Industrial Joysticks - APEM acquires CH Products

APEM, a global manufacturer of electrical switches, switch panel and LED indicators, is pleased to announce the acquisition of CH Products, a leading manufacturer of joysticks, trackballs and simulation control devices. CH Products has been a leading manufacturer of advanced motion control solutions for more than twenty-five years. CH manufacturers a wide range of resistive and hall-effect joys...


Date 2008-10-09 APEM APEM offers MIL-SPEC Professional grade Toggle switches

APEM offers MIL-SPEC Professional grade Toggle switches

The US Department of Defense has granted APEM a QPL certification for its 12000X778 series professional grade toggle switches. Our products are listed on 2 Qualified Product Lists • QPL 3950 « switches, toggle, unsealed and sealed toggle » • QPL 83731 « switches, toggle, environmentally sealed » The Qualified Products List (QPL) lists specific part numbers which the manufacturer has demonst...


Date 2008-10-02 ODU Central Locking system for the ODU MAC LC

Central Locking system for the ODU MAC LC

The connector manufacturer ODU is expanding its ODU MAC LC (Modular Rectangular Connectors) with a central locking unit. The connectors can be inserted and removed with less force and single handed with the assistance of a spindle. The compact design means that the spindle locking module only requires a fitting length of 12mm. The locking system is mainly designed for installation in aluminium h...


- - - - - - - - - -



liste-press news di En 2009-11-48-27