171 press releases : Electronics: Semiconductors, Integrated Circuits, Circuit boards

For Immediate Release: Berkeley Nucleonics Corporation (BNC Corp) announces a 50 MHz Function / Arbitrary Waveform Generator at same low price San Rafael, CA New 50 MHz Function / Arbitrary Waveform Generator addresses increased need for high speed waveforms; expands on current applications, provides avenues for new research, and employs an easy to use interface. Same great price for domestic...

SCHURTER presents its new 3-phase line filters, series FMAC ECO and FMBC ECO. These compact and cost optimized filters are in ECO designed and especially suited for use in drive systems, engineering installations and places where frequency inverters cause electromagnetic disturbances. The EMC filters are arranged for use with 480 VAC installations and are available in single or two stage versions....

A cooling element protects components against high temperature. This can be ensured, as long as enough heat can be dissipated to the surrounding environment. This however is a problem with modern electronic components. Particularly if the cabinet has to be fully closed and does sufficient vents because of EMC and other safety aspects. A reliable method is to implement metallic cooling elements whic...

Kontron introduces the Kontron CP6001-V, a new 6U value line CompactPCI CPU board specially designed for cost-sensitive industrial applications. Equipped with the 1.86 GHz Intel Celeron M processor 440, the Intel 945GM chipset, up to 4 GB 533 MHz DDR2 SO-DIMM and the ICH7-R IO controller hub, the new Kontron CP6001-V CompactPCI board is optimized to provide the best cost/performance ratio. Due t...

Why Insulation Test Is necessary? A. Insulation: 1. Every electrical apparatus and installation need to be safe for the user and for the equipment itself. 2. Electrical conductors of electricity need to be insulated from each other so that they do not create electrical hazard or unnecesary consumption. 3. Badly insulated circuits can create leakage current which can be dangerous and trip yo...

Mechanical, thermal and chemical wire stripping processes cause damage to underlying wire that can affect electrical component performance and cause unacceptable conductor failures for aerospace, defense, medical, automotive and other industrial companies using mission critical electronics. Manufacturers of these devices need to be aware that laser wire stripping technology is available that wil...

Heol Design has released the new N016 embedded GPS receiver board creating a replacement or an upgrade for the industry standard Trimble Lassen iQ and SQ receiver boards. The Heol N016 uses the latest Trimble Copernicus GPS chip set, creating a high sensitivity form and pin compatible replacement for one of the best selling receivers in the market.

This new female connector in EDAC's 153 Series offers a low cost solution for bulk harness wiring requirements. Being an upwards compatible second source yet with more stringent tolerances which ensure reproducible latching performance, the connector is particularly suitable for automotive and industrial applications where not only low cost components are required but also high reliability and t...

The latest addition to the already large range of battery holders is an open frame style for CR123A size cells. First designed for equipment requiring extended life in high drain applications such as LED torches, film cameras and digital cameras, the characteristics of this high power, light weight cell make it an ideal choice for applications such as Zigbee where space could be at a premium and ex...

This unique approach to SS/SMT switching allows the customer to process a Hall-effect chip and LED (optional) to their board. Then the Series 39-8 actuator is simply snapped in place. This can be done manually or robotically thus completing a totally process compatible switching system. The solid-state (Hall-effect) switching means there are no mechanical contacts. They come as momentary or main...

Greenray's new T1300 Series is relatively impervious to the effects of shock and vibration and represents a major breakthrough for compact, low-power TCXO performance. Utilizing a combination of proprietary crystal and oscillator design techniques, the T1300 offers g-sensitivity of <0.05 ppb, or 5 x 10-11/g of applied acceleration force. This is an order of magnitude improvement when c...

The new nano push button 145 NTG sets new standards in minimising the reed switching technology at elobau. The 145 NTG push button was first introduced at the MOTEK 2008 and impresses with its small size of 15.85 mm height and 15 mm diameter. The push button has a bicoloured lighting which enables a “day and night design”, as it is e.g. requested by the automotive industry. The push button caps ar...

The synchronised AC/DC power supplies of the ZAT series manufactured by Zentro-Elektrik can be used as power supply units or as battery chargers. The robust reliable devices have been designed for use in telecommunications and industry. They are available in the output classes of 60 W, 120 W and 240 W and the output voltages of 12 VDC, 24 VDC, 36 VDC, 48 VDC with a wide adjustment range from +25 …...

The DC laboratory power supply of the ZAS series manufactured by Zentro-Elektrik is a flexible AC/DC power supply series of high power density for OEM, industry and laboratory application. Built in keeping with the principles of the “zero voltage soft switching technology”, with digital coding of the voltage and power settings, automatic mode switch between constant current / constant voltage, pa...

With the Kontron Concept Box, Kontron presents a new series of fanless compact Embedded Box PCs that come in different physical sizes and can be flexibly configured according to individual functional requirements. This significantly reduces the time-to-market for compact Box PCs with customer-specific configurations. Starting from the smallest dimensions of 40 x 200 x 200 mm (H x W x D), OEMs c...

Schaffner’s impressive new FN 9244 filters deliver excellent attenuation performance. They are intended to supplement the existing IEC inlet filter range, are available with various options, and can be mounted in a variety of ways. Schaffner, the international leader in the fields of electromagnetic compatibility and power quality, has expanded its IEC inlet filter series by launching the new FN...

ETB is a digital electronic timer with quartz oscillator, pause-start (ON - OFF) operation and programmable times. The device, realized as a board without cover, is equipped with 3 push-buttons, 2 three-digit displays and 2 LEDs which allow, respectively: - to program operating times; - to display the time countdown; - to indicate the time range (seconds or minutes). Two versions are available:...

Ultra-low frequency oscillator, Model T124 series TCXO provides low frequency squarewave output between 650 Hz to 1.25 MHz in a compact surface mount package, with temperature stabilities down to ±0.3 ppm over -40 to +85°C. Available at 5V or 3.3 V input voltage with or without Electrical Frequency Control

The TEP-100 series is a range of high performance isolated dc-dc converters which have been designed particularly for industrial applications,where no pcb mounting is possible.Threaded M3 inserts in the metal case makes chassis mounting very simple.Easy connection is possible with the optional screw terminal adapter.There are 12 models with output voltages from 5 to 48VDC and input ranges of 18-36 ...

Suitable for operation in Industrial Plants, Air-traffic Control Systems, Power Utilities, Telecom & other Critical Applications. Absopulse Electronics’ BAP 236 is a redundant converter system comprised of up to six, 200W DC/DC plug-in modules in a pre-wired 3Ux19"x13" shelf. Cooled by natural air convection, the BAP 236 system has no fans or other moving parts. This, large design headroom and l...