109 press releases : Hydraulics: Cylinders, Pumps, Solenoid Valves…

Starting from this month, SAER ELETTROPOMPE S.p.A. has started the distribution to all its customer of its brand new Pump Selection Software (PSS). This new skill has been projected in order to help our Customers in the selection of the right pump. This is going to be a very usefull skill for promoting and studing the right pump for the Customer's purposes, for offers' presentation, preparation ...

Atos digital electrohydraulics is the resuit of R&D activities on innovative DSP microcontrollers, simulation models of valves and Systems, development of advanced software, extensive field testing of new components and solutions. A wide range of digital electronics is now available within the Atos electrohydraulics line in order to exploit the well known advantages of digital technology: enh...

High Power Density A lighter and more compact machine with higher pressure rating and increased power density (output power/ mass) was obtained by adopting a half log type swash plate. In particular, the double pump with its tandem arrangement, has eliminated a power divider, has an increased transmission efficiency, and is lighter. High Efficiency and Large Self-Priming Capability The sphe...

In the preceding news we have spoken about the systems of filtering commonly used on our machines, now we can go outwit speaking about the circuits of filtering. It would be possible choose among different typologies, according to the type of machine and the requirement of the client. All the circuits are fed by a pomp that pushes the liquid through the filters for after conduct it in the reservoir...

A good system of filtering is necessary to avoid the pollution of the liquids and to maintain constant in the time the efficiency of washing. A bad filtering, in fact, negatively influences on the productivity and on the good operation of the whole plant. Ceever take care of his machines in every least detail, for this we have endowed them with excellent systems of filtering: Bag filters are, at...

Enerpac introduces its NEW BP-Series Battery Powered Hydraulic Pump. This hydraulic power unit is suited for small to medium size cylinders or hydraulic tools, or wherever portable cordless hydraulic power is needed. Powerful for everyday use, its lightweight and ergonomic design is ideal for remote sites or whenever a cord or hose gets in the way. Dual power selection and variable speed fo...

Ogura has modified the MC electromagnetic clutch line to incorporate ball bearings. Previous designs had bushings which had limitations of 600 RPM. The new clutches have two ball bearings underneath the field assembly allowing the clutch to comfortably operate at 3,600 RPM. The zero back lash single spring armature design prevents any chance of armature rattle allowing for a quiet operation. ...

As the leader in research, development and production of radial piston hydraulic motors, SAI regularly designs bespoke products and accessories for a wide range of industrial and mobile applications. A perfect example of this was when Nilfisk, who manufacture the new generation sweeper pictured above, wisely chose SAI to be the development partner for this, their latest project. The machine is po...

Innovation in filtration As one of the world‘s leading manufacturers of innovative solutions for the hydraulics industry, ARGO-HYTOS has opened a new chapter in the history of hydraulic filtration, with the introduction of EXAPOR®MAX 2. The requirements of machine operators in the area of mobile and industrial hydraulics for ever-greater machine availability, longer service intervals, lower-c...

Water is not desired in hydraulic systems. In small amounts it can cause corrosion and accelerate aging of the oil. In larger amounts – for example if a radiator breaks – entire production areas will be contaminated with oil. In addition to the costs associated with the damage, the system must be cleaned and then filled with new oil. These costs can be minimized or prevented with advance warning. ...

Rated to 3000 psi. Spline or keyed shafts, side or rear porting, dual rotation available on standard models. Pressure balanced loading plates on either side of gears for maximum efficiency. SAE "B" 2-bolt mount. Rated to 44 gpm. 7 sizes: 1.52, 1.95, 2.32, 2.74, 3.30, 3.80 and 5.20 in3/rev.

Fast - Accurate - Robust Five CETOP valves to handle flows to: 1500 Ipm at pressures up to 350 bar. An unbeatable level of opération, achieved with a System cleanliness level of Class NAS 10 Frequency response levels, dépendent on model size: 450-100Hz (Phase 90) High résistance during opération to effects of vibration measured at greater than: 200G (1960 M/S 2)

Crankshaft design radial piston motors The main characteristics of this type of design are high mechanical efficiency, especially at start up, and high volumetric efficiency. A number of features distinguish SAI motors from other radial piston designs: Swivelling cylinder: the cylinder (1) remaining aligned with the eccentric of the crank (3), eliminates side loading between the cylinder and p...

DSTI is pleased to announce that QAS International has awarded Dynamic Sealing Technologies Inc. certification to ISO 9001:2000. This significant achievement demonstrates DSTI's commitment to client satisfaction and continual improvement. “Quality has always been a primary focus of everyone at DSTI" comments John Knoll, Vice President of Global Sales for DSTI. "I am very proud of our team here...

World class quality manufacturer Kawasaki Precision Machinery will be unveiling six new products this year at stand Hall 021, stand B07. It promises customers greater power, life, versatility and efficiency. The HPC is the new “class leading” high power dual displacement radial piston motor solution, with enhanced power, performance, speed range, back pressure capability and displacement range s...

New product for Hannover Fair 2009 HAWE Hydraulik SE, Munich, has developed a pressure control valve with safety valve function named CLK type. The added feature makes the valve particularly suitable for operation in hydraulic systems in which temperature increases and/or external load peaks can result in unwanted pressure increases. The construction as seated valve at the same time makes it...

In the company's long tradition of designing and manufacturing compact pump aggregates, the "NPC" comes as the youngest and smallest hydraulic power pack aggregate ever built by the Munich-based HAWE Hydraulik SE. Designed for universal deployment for all hydraulic consumers with low oil volume requirements - such as mobile applications on construction sites, and wherever energy is supplied by DC p...

PONAR Capital Group as a comprehensive supplier of hydraulic solutions Last four years were for PONAR Wadowice the period of hard work and dynamic development. At present, PONAR GROUP includes five companies operating in power hydraulics and it gives the possibility of complex customer service. Changes in organizational structure and lots of investment (oriented on the modernization of machines ...

CEJN has expanded its product range with several new hydraulic series and have thereby become one of the strongest suppliers of quick connect components on the market. The new products are launched in April and will be available through CEJN’s sales channels worldwide. The global quick connect specialist CEJN, has since 1955 developed, manufactured and marketed quick connect couplings and acces...

Application Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the workpiece surface irregularities, also vibration and deflection under machining loads. The threaded-body design allows for spacesaving and direct installation into the fixture body. Oil supply is made through drilled channels. Description In...