Hardinge® HCAC® Collet Adaptation Chucks will adapt any spindle manufacturers to accept C-series collets, 3J collets, B42/ B65 collets, #22/ #11 B&S collets, style-S master collets and dead-length® collets. It is possible to increase your machining capabilities by substituting a collet chuck for a jaw chuck for part diameters up to 4 inch depending on the spindle size.
The benefits of usi...
Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet and abrasivejet systems for precision cutting, coating removal and surface preparation, announced today that it has appointed Robert Bangasser as its new corporate sales manager.
Bangasser is responsible for Jet Edge's worldwide sales activities. He has previous experience in various sales management roles at all...
The Renishaw MP250 is an ultra compact touch probe for grinding machines suppliers that sets new standards for the precision measurement of 3D part geometries, whilst offering all the standard probing benefits of reduced set-up times, reduced scrap and improved process control . With robust construction and proven solid-state electronics, the MP250 touch probe is also suited to the harshest of m...
The new JAKOB torque handle, a clamping nut with a built-in overload mechanism, is used in today's increasingly sophisticated assembly and manufacturing situations. It can be used in "universal applications" for specific cases where controlled, manual clamping or holding is required with frequent repetitions and without tools (such as industrial torque wrenches ).
Even experts gaze awesomely at faceplates with a diameter of 5m and workpieces with a weight of more than 200 tons. How do you get these workpieces clamped onto the faceplate?
As manufacturer of power clamping screws, JAKOB Antriebstechnik offers the ideal solution to clamp workpieces as turbinerotors onto the faceplates. clamping screws with an ingenious interior move the holding cantilever...
Rochester, New York, March 30, 2008—Gleason has introduced a new line of gear gashing, shaping and hobbing cutters that employ the latest in replaceable, indexable carbide insert technology to make significant improvements in the speed and efficiency of large spur and spiral gear production.
The new OPTI-CUT™ series of cutters is one of the first in its size range – as large as M...
This is WhizCut’s third time at the EMO in Hanover. This time WhizCut is very proud to introduce three new product lines. The first is a development of the WhizIn product line that was shown for the first time in EMO 2005. WhizCut has developed a range of inserts for face grooving in small diameters. Due to the patented leaning bar of the WhizIn a higher stability and longer tool life is gained usi...
OSG Europe is pleased to introduce new & high performance15xD & 20xD HSS industrial drills without coolant holes. TDXL features four newly developed technologies including three patents pending!
- New flute shape (Pat. P.) dramatically improves chip evacuation !
It is capable of non-step drilling up to 20xD!
- The newly developed thinning (Pat. P.) exhibited h...
Working with industrial barcodes brings security
Human input errors are avoided and the frequently considerable stream of information carried in the black lines is read in without errors by scanning.
Bar code development originated in the 1970s when the first data processing systems began to be used in enterprise resource planning systems. Nowadays, the barcode has become an essenti...
Jet Edge, Inc., is pleased to introduce the iP36-280DS diesel-powered waterjet intensifier pump.
Ideal for use in remote and/or mobile locations where electricity is scarce, the iP36-280DS is powered by a reliable 280hp Cummins turbo diesel engine that meets domestic and international Tier 3 emissions standards. It is capable of producing a flow rate of up to 7.2 gallons (27 liters...
Customer story: the Swedish shipbuilding company Aerodyn increases depth of cut by 50 %, thus doubling tool life
The Swedish company Aerodyn specialises in the machining of blades for propelling screws. The cast skin is eliminated and the profile finished through milling. After milling the surfaces are carefully polished. In this way, since the year 2000, several projects have bee...
STM was successfully participating on the MosBuild in Moscow from 01st – 4th of April 2008. The exhibition MosBuild is known as the “biggest exhibition for industrial buildings and interior in Russia”. The visitors can receive information about the whole band width of the building industry in different subject areas. STM was participating in the sub-exhibition Windowbuild and demonstrating how th...
Newly redesigned adjustable ball lock pins from Carr Lane now have added clamping strength. These locking pins are ideal for pulling two components together or to provide an adjustable grip length. Available in steel or stainless steel, adjustable ball lock pins are manufactured with four balls instead of two, for more-distributed ball-pullout force in clamping applications. Available in three ...
Our website www.stm.at is really international now!
You can find informations about our waterjet cutting systems in not less than 23 different languages on www.stm.at!
Wether materials, that can be cut, the advantages of waterjet cutting or the equipment of our machines – everything here in Japanese, Czech, Finnish and co.!
Patented feeding system for strip or wire to be installed on forming devices , professional press units, profiling machines, etc. Especially suitable also for profiled, enameled or coated material with sensitive surface. Processing machines can be charged with material which is directly fed from the coil in exactly defined lengths from zero to i...
The S256 is the first solid carbide end milling tool developed by Dormer specifically for the machining of Stainless Steels and Exotic Alloys. Adding to their extensive range of high performance, material specific tools, the S256 can be used across a wide range of applications, from roughing to finishing.
Featuring a concept already used to great effect, the S256’s unequal helix a...
Dormer’s new S140 and S142 Solid Carbide slot professional drills have been specifically developed for milling operations in Aluminium:
• The S140 (medium cut length) has been designed for slotting and contouring in almost all kinds of aluminium alloys, as well as thermoplastics
• The S142 (long cut length) gives exceptional performance in ‘super-finishing’ applications, and...
AGME, specialist in the designing and manufacturing of Riveting Machines, Professional presses and forming assembling special machinery, has recently released its Radial Riveting Machines New Generation. AGME produces a wide range of Riveting Machines, available in a variety of sizes, from the RR-4 to the RR-30, so that the correct machine can be selected to ensure perfectly riveted components. R...
The setup of the machine tool in the metal-removing production is as decisive as the pit stop in a formula 1 race. Along with velocity, the right strategy and the right clamping concept are required.
To resolve the conflict of objectives between flexibility and optimization of the machine running times, KIPP provides the ideal prerequisite to reduce non-productive times by offering...
- 
- 
- 
- 
