181 press releases : Machines and equipment: Welding, Assembly

RITMO S.P.A. presents 315 BASIC, the new butt welding machine for pipes and joints in HDPE, PP, PB, PVDF. The 315 BASIC is distinguished by the excellent quality – price ratio, while maintaining reliability, precision and ease of use, along with RITMO’s standards. With the 315 BASIC, RITMO makes its machines and work philosophy available to everyone! 315 BASIC is able to weld fittings such ...

Italbras is also manufacturing brazing alloy rods with square and rectangular section. These rods are usually made by AgCuP and CuP alloys. The square section is useful because it is easier to grip with hands by brazing operators and it does not slip when hands are dirty by oil. Square section rods may also help brazing people in choosing different alloys even if the packaging is not visible: choos...

We just had to tell you all about an incident at the annual American Welding Society Exhibition. The lead engineer for the Bechtel/Bioku Island LNG project in Equatorial Guinea walked onto the stand of Cob Industries, HFT’s US exclusive distributor, and presented a $95,000 order which included a large number of Argweld® Quick Purge Systems. Bechtel continues to be one of our largest and most...

PORTABLE AND VERSATILE : the US 30 pipe bevelling machine is THE portable machine suited for weld preparations on every kind of steel and stainless steel. machining capacity: 30 mm ID – 114,3 mm OD clamping capacity: 30 mm ID – 114 mm ID bevel forms: I, V, U oder Sonderform Facing, 30 and 37°30 bevel, J-bevel, others on request clamping: manuell, mit Schlüssel manual with key...

The PROTEM GR series are outside clamping machines, specifically designed for membrane wall panels. They enable simultaneous weld end preparations and excavation of the wall membranes. The machine’s body are made of aluminium with improved mechanical characteristics which permit a combination of lightness and resistance, particularly adapted to on site machining conditions. The clamping device is c...

Solar Cell Stringer connects solar cells with lead wires and makes them solar modules. This connection is done by an automatic cell alignment and soldering process. Solar Cell Stringer Belts are exactly for these process. Features - Belts are made from heat resist and high tensile stainless steel. They withstand heat in lead-free soldering. - Surface is fluoroplastic-coated. Flux on the coat...

AGME has designed and manufactured a special purpose machine for helving silent blocks on motor beds for an important international automotive components manufacturer. The machine cycle time is: 10÷12 seconds. The machine has the following features: • Fabricated base • Tooling to locate components with parts with parts presence control laser detectors • Pneumatically operated slide for ...

WEST CHESTER, Pennsylvania, April 2, 2009 -- Sonobond Ultrasonics announced today that more and more manufacturers are relying on its SonoWeld 1600 Digital Metal Spot Welder and its Dual Head Metal Spot Welder ultrasonic units for ultra-dependable battery assembly. According to Melissa Alleman, Sonobond's vice president, "Our technology is especially important to companies that produce rechargeabl...

“TorcUP Unleashes The RAPTOR Pneumatic Torque Wrench!” TorcUP is pleased to announce The RAPTOR, with continuous and repeatable torque and an accuracy of +/- 5%. Running fastest during actual torque, not free nut run down, the RAPTOR is ready to accommodate your pneumatic needs from 120 ft/lbs to 6,000 ft/lbs. The RAPTOR’s patented gear technology gives greater durability and lower operat...

The hot-air welding equipment Quick-S-Electronic stands out for its unique ergonomic handle. Thanks to its ergonomics and light weight the user can handle the equipment professionally and effortlessly. The equipment has a heat output of 1500 Watts 230 V and a constant and completely reliable electronic control for temperatures up to 700 °C. Moreover, the equipment is easy to service thanks to...

Innovation and economic success are not always two sides of the same coin, even with high-tech products. However, if we all stopped coming up with innovative ideas and putting them into practice, there would be no new high-tech solutions. CMT (Cold Metal Transfer) and the new DeltaSpot (resistance spot welding) serve as justification for the Fronius average of 16 new parent patents each year. There...

Our new tool for threaded inserts mod. KJ45/S is available for sale, replacing the old model KJ45. The most important news as regards KJ45 could be summarize as follows: - innovative system of fast mandrels change, - opening/closing cock for inlet compressed air For any further information, please check the menu "Products/Tools for threaded inserts" for technical features ...

NEW BASIC LINE - butt fusion machines, TECHNOLOGY MADE IN ITALY RITMO S.P.A. presents BASIC, the new Line of butt welding machines for pipes and joints in HDPE, PP, PB, PVDF. BASIC was designed by thirty years of experience in manufacturing, producing reliable and versatile welding machines, adapt for all environments, even the harshest such as deserts and mines. The New BASIC Line is distin...

SAVE TIME AND MONEY ! Try the advantages of the new professional PS 400 orbital pipe scraper. - Easy to use - Fast to perform - Accurate in scraping, - Useful in narrow spaces. Stop loosing your time and get exhausted, for a job poorly done. Invest on an essential tool !!! Ritmo presents PS 400 scrapers for plastic pipes and fittings. PS 400 is a professional rotary scraper,...

Gullco KATBAK® Ceramic Weld Backing lets you produce x-ray quality back beads on your root pass while welding from one side only. More metal is deposited while defects and rework are dramatically reduced...eliminating costly gouging and grinding. Ceramic tiles are available in a variety of sizes and configurations and are mounted on wide heat receptive, pressure sensitive adhesive foil for easy, ac...

Gullco’s Welding Positioners improve quality and productivity with positive drive rotary turn tables complete with mounting flange, drive and tilt mechanisms and microproprocessor based pulse width modulation motor controls. The microprocessor motor control enables operator interface of start, stop, clockwise rotation, neutral, counter clock-wise rotation and infinitely variable control of the spee...

Branson Ultrasonics Corporation introduced its newest line of Rotary Indexed (RI) thermal welding systems which give manufacturers increased productivity and throughput for this assembly process. The Branson RI 201, 301 and 401 series welders integrates a two position rotary table with Branson’s standard thermal welders and are used for staking, swaging, insertion, degating, and date stamping. ...

Characteristics: • Toku hammers have been used for many years in various industries, e.g Demolition, Foundries, Construction etc. • Toku only use the very best materials in the manufacture of their products giving the tools superior life. • Due to popular demand we have included a version of this tool to our range with a solid retainer. • The design of the solid retainer enables the use of poin...

AGME, the leading manufacturer of assembly equipment, has recently launched its new web site at www.agme.net. This new site, based on Agme´s corporate colours (black and yellow), is more user friendly and it enables customers to quickly and simply access the area that are of most interest to them. It is possible to obtain technical information on all of the companies´ products and download brochure...

WEST CHESTER, Pennsylvania, March 10, 2009 -- Sonobond Ultrasonics, a leader in ultrasonic metal welding technology since 1960, announced today that it will be introducing its Dual Head SpliceRite™ Ultrasonic Wire Splicer at the National Electrical Wire Processing Technology Expo in Milwaukee, May 20-21. In making the announcement, Melissa Alleman, Sonobond's Vice President, said, "This new machin...