With the MDW600, Piovan launches in the market its new range of gravimetric blenders. The new model has a nominal capacity of 600kg/h and can dose up to 8 different components.
The MDW600 is suitable for application in the fields of injection, extrusion and blow-moulding. It can be installed on the feed-throat of the injection moulding machine or industrial extruder in single applications,...
In the field of drying, Piovan has developed the application of an innovative technology: the use of a rotor with a honeycomb structure to eliminate the humidity released by plastic material during the drying process.
This brand-new series, presented for the first time at the K2007 show, consists of four models that operate in a temperature range from 80 to 150°C, with air flows from 50 to 2...
Objet recently announced, PolyJet Matrix™ Technology and the Connex500™ 3-D professional printing system which provide the first ever solution for printing multi-part models.
Objet’s patent-pending PolyJet Matrix Technology enables simultaneous jetting of different types of model materials – the first technology to cross the single-material boundary. This innovation opens up virtu...
At the K, Cincinnati Extrusion GmbH, Vienna, Austria presented its fast-running Rapidex single-screw extruder, which offers many advantages. Com-pared to conventional extruders suppliers , it stands out by its compact design, lower costs for spare parts, lower energy consumption and enormous output.
The new, fast-running Rapidex 60 reaches an output of up to 1,600 kg/h in processin...
The joy of Ray Reed, CEO of Iplex Pipelines, Australia, was immense when his name was read out at the official drawing of the 500th Alpha extruder on Octo-ber 30 at the booth of Cincinnati Extrusion GmbH during K 2007.
Together with about 300 other persons interested from all five continents, the lucky winner had taken part in this unique campaign staged by the Viennese machine manu...
Precision Flow Control for FMI RHV, QV, & QVG50 Valveless Pumps
Model QV: High Flow 0-2300 ml/min
Model RHV: Low flow 0-180ml/min
Model QVG50: Low Flow 0-64 ml/min
Model Q2V Ratio: Matic Dual Head Proportional
FMI's V300 is a variable stroke rate feeding pump system that drives FMI pumps from 5% to 100% of their rated flow with 0.1% adjustability. Typical spee...
Jet Edge, Inc. introduces the new Jet Edge X-Stream xP90-100 waterjet intensifier pumping . Capable of producing pressures in excess of 90,000psi (6,200 bar), the 100hp X-Stream achieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60,000psi (4,100 bar) pumps, enabling users to increase productivity and reduce part costs.
Belonging to CNIM group and being a major industrial player in the environment and ecology sectors, BABCOCK WANSON ITALIANA will be present at the Pollutec - Horizons exhibition which will be held from the 27th to the 30th of November 2007 at the Villepinte Paris-Nord Exhibition park * (France).
Go to sector Air, Hall 5A stand S 122 to discover BABCOCK WANSON ITALIANA stand devoted t...
Carlsbad, CA – November 12, 2007 –Asymtek, a Nordson company and leader in coating, dispensing, and jetting technologies, announces that MYDATA Automation AB has signed a license agreement with Nordson Corporation involving patents for jetting processes developed by Asymtek, a Nordson subsidiary. MYDATA will use this technology in its jet professional printer products designed for surface mount ...
Baling and compaction solutions from Orwak can contribute a lot to waste handling in different market segments. Once you have read about the advantages, it is easy to understand the meaning of Orwak’s slogan “Making sure less is more”.
Versatile compaction: – the vast range of products produced, supplied to or sold by all market segments produce a huge mountain of waste that must...
Pollution of the natural environment is detrimental in many ways. Poor air quality can lead to respiratory problems, and windblown waste is not only an eyesore but also clogs drainage systems and poses a health risk. Therefore it is important that organizations help promote a healthy environment for both physical and mental well-being.
A new medium capacity Centri-Sifter® centrifugal screener model “MO” from Kason Corporation features a cantilevered shaft with two, externally-mounted bearings manufacturers between the screening chamber and motor drive, allowing all internals to industrial slide freely from the shaft end for cleaning, screen changes, or inspection. Wide spacing between the bearings, a large diameter shaft, and...
RETSCH’s new Mixer Mill MM 400 is the ideal tool for the fast and efficient homogenization of small sample volumes in the laboratory. It processes a great variety of materials such as tablets, minerals, bones, tissues, soils and plastics and achieves grind sizes down to 5 microns.
The MM 400 features two grinding stations and allows for the preparation of up to 20 samples simultaneously. A ...
Micro Plastics International, Ltd. product line of “X-MAS TREE TYPE PROFESSIONAL FASTENERS ” has now been expanded to include over 50 new standard sizes, with 8 special item clips. In addition, a metric line of over 20 sizes is also now available. These uniquely designed fastening snap-in clips feature a unique ribbed shank that ensures fast and easy installation. Clips hold secure in a wide r...
TOSH group, leader in the professional production of manufacturers of pad printing machines and products, presents on objects decoration market since more than 25 years, will show on next VISCOM exhibition sit in Milan from 8 to 10 of November, his range of machinery Serie LOGICA, based on the innovative fully electrical principle CNC, imposed a measure in quality and technology, recognized all...
Together with the Korean company Hwashin, AP&T has developed a unique process for professional press hardening chassis components for the automotive industry. The new process allows steel parts to be manufactured with high strength and low weight considerably more efficiently than before.
The tough competition in the automotive industry is the driving force behind the development ...
The PM100 system is the first professional laser sintering equipment adapted for the industrialists who mainly manufacture small parts; It is also a tool which is highly geared towards research and development, and also training, as it provides all the resources of the process at the least possible cost.
Fluitec designs and produces a large variety of products for specific operations in the chemical process technology, but also in the plastic-, the food-, the environmental- and pharmaceutical-industry.
Products and know-how of Fluitec are based on the principle of the static mixing technology. Fluitec also helps its customers to improve efficiency and profitability of this smart tech...
The Lord Ezra award 2007 for excellence in the combustion industry was awarded to Ian Roberts of Byworth Industrial boilers . A 2 year R&D project in conjunction with Leeds University culminated in the launch of the Yorkshireman2 which has taken steam boiler manufacturer efficiency to new levels, around 2.5% higher than all other boilers on the market. The new boiler range has optimum configur...
- 
- 
- 
- 
- 
- 
- 
- 
-
