189 press releases : Manufacturing and Process Equipment

TAMPOPRINT® AG presents a novelty in industrial laser technology with its new ALFALAS® „WST“ Professional workstation – as bench model, the ideal table-top solution. Convincing smallest dimensions. Equipped with a 20 W diode pumped laser the “WST” offers a large working place with little required space for marking all kinds of workpieces up to a height of 100 mm. The so-called “all-in-one“ solu...

Elfab, Europe’s leading manufacturer of bursting discs have further developed their product range to allow OEM customers to benefit from their fail-safe burst detection system Flo-Tel™.

Since the launch of Flo-Tel™ in 2003 Elfab have sold thousands of units of the integral burst detection system to a range of industries worldwide. Elfab have now further developed their burst detec...

Elfab, Europe’s leading manufacturer of pressure-relief systems, has improved its non-invasive burst detection system, Flo-Tel™.

The new Flo-Tel™ + combines all the benefits of Elfab’s original burst detection system but now has the added advantage of an in-built thermistor , allowing customers to monitor process temperature. Undetected temperature changes can affect both the burs...

Seven complete aluminum composite pipe coextruders installed in 2007 are the best possible evidence that the joint concept of Battenfeld Extrusionstechnik GmbH, Bad Oeynhausen, and TEMPLET Deutschland GmbH, Seligen-stadt, both located in Germany, optimally caters to the needs of the market.

The complete line concept introduced by Battenfeld Extrusionstechnik and TEMPLET two years ...

The original assignment was the creation of shorter production times in the manufacture of industrial pipe fittings . Initially the reference to a “ industrial vacuum cleaner ” seems fairy far-fetched, however the new DEBUS extraction plant assists in the manufacture of professional pipe professional fittings in three ways:

a) Cycle times can be significantly reduced, as the ind...

MILLBURN, NJ—A new Low-Profile, Sanitary Screener from Kason Corporation employs two unbalanced-weight gyratory motors mounted on opposing exterior sidewalls of the unit, instead of one motor positioned beneath the screening chamber, reducing minimum height requirements significantly. Mounted on suspension brackets, the design also allows vertical alignment of the top inlet and bottom outlet, allow...

Rexnord is pleased to offer the FalkTM Quadrive® 5000 series shaft-mounted drive. Shaft-mounted drives eliminate foundations and alignment providing grain handling, cement and aggregate, and all types of bulk material handling users with a low installed cost. In addition, the 5000 series enhancement provides increased ratings allowing for smaller drive selection. All of which leads to huge savin...

Rexnord Industries, LLC is proud to introduce the Rexnord® 6000 Series SHURLOK™ Adapter Mount Roller bearing supplier .

The innovative 6000 Series SHURLOK adapter mount roller bearing increases an operation’s efficiency and profitability by reducing installation errors, maintenance costs, and downtime. Studies indicate an 80% savings potential versus some competitive manufacturer of bearings...

EFD's new Performus line of fluid dispensers apply controlled amounts of the industrial adhesives , lubricants, sealants, solder pastes and other assembly fluids used in most manufacturing processes. Benefits of controlled fluid application include better quality, higher yields and lower production costs.

Models range from the basic Performus I for manually controlled dispensing pro...

PITMAN, NJ (December 5, 2007) – Forbes Magazine ranks K-Tron International
19th on its list of “The 200 Best Small Companies” in America. The October 29, 2007 issue of Forbes profiles its top 200 publicly traded companies by rank, and includes sales revenues, five-year averages in sales growth, earnings per share growth, and share market value. The feature story also includes an article on ...

Silverson has developed a unit for small to medium/pilot professional scale production of Mayonnaise.

The unit is designed to carry out the entire process, including rapid preparation of premixes, hydration of thickening and stabilising agents and preparation of the final oil-in-water emulsion.

The Silverson Mayonnaise Plant is designed to meet the need for a simp...

Silverson’s High Shear In-Line industrial mixers are widely used in the refining of edible oils such as soybean, rapeseed, corn etc. The rise in demand for biodiesel has seen a major increase in activity in this market, as existing producers seek to expand capacity and new facilities are being set up.

The main application for high shear mixing is the reagent additions – phosphoric...

With the MDW600, Piovan launches in the market its new range of gravimetric blenders. The new model has a nominal capacity of 600kg/h and can dose up to 8 different components.
The MDW600 is suitable for application in the fields of injection, extrusion and blow-moulding. It can be installed on the feed-throat of the injection moulding machine or extruder supplier in single applications, o...

In the field of drying, Piovan has developed the application of an innovative technology: the use of a rotor with a industrial honeycomb structure to eliminate the humidity released by plastic material during the drying process.
This brand-new series, presented for the first time at the K2007 show, consists of four models that operate in a temperature range from 80 to 150°C, with air flows...

Objet recently announced, PolyJet Matrix™ Technology and the Connex500™ 3-D professional printing system which provide the first ever solution for printing multi-part models.

Objet’s patent-pending PolyJet Matrix Technology enables simultaneous jetting of different types of model materials – the first technology to cross the single-material boundary. This innovation opens up virtu...

At the K, Cincinnati Extrusion GmbH, Vienna, Austria presented its fast-running Rapidex single-screw extruder, which offers many advantages. Com-pared to conventional extruders manufacturers , it stands out by its compact design, lower costs for spare parts, lower energy consumption and enormous output.

The new, fast-running Rapidex 60 reaches an output of up to 1,600 kg/h in proce...

The joy of Ray Reed, CEO of Iplex Pipelines, Australia, was immense when his name was read out at the official drawing of the 500th Alpha extruder on Octo-ber 30 at the booth of Cincinnati Extrusion GmbH during K 2007.

Together with about 300 other persons interested from all five continents, the lucky winner had taken part in this unique campaign staged by the Viennese machine manu...

Precision Flow Control for FMI RHV, QV, & QVG50 Valveless Pumps
Model QV: High Flow 0-2300 ml/min
Model RHV: Low flow 0-180ml/min
Model QVG50: Low Flow 0-64 ml/min
Model Q2V Ratio: Matic Dual Head Proportional
FMI's V300 is a variable stroke rate metering pump manufacturer system that drives FMI pumps from 5% to 100% of their rated flow with 0.1% adjustability....

Jet Edge, Inc. introduces the new Jet Edge X-Stream xP90-100 waterjet intensifier pumping . Capable of producing pressures in excess of 90,000psi (6,200 bar), the 100hp X-Stream achieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60,000psi (4,100 bar) pumps, enabling users to increase productivity and reduce part costs.

The X-Stream pr...

Belonging to CNIM group and being a major industrial player in the environment and ecology sectors, BABCOCK WANSON ITALIANA will be present at the Pollutec - Horizons exhibition which will be held from the 27th to the 30th of November 2007 at the Villepinte Paris-Nord Exhibition park * (France).

Go to sector Air, Hall 5A stand S 122 to discover BABCOCK WANSON ITALIANA stand devoted t...