At the K 2007, the extrusion industry can expect another world premiere: Cin-cinnati Extrusion GmbH, Vienna will raffle off its 500th Alpha extruder among all who have completed and handed in a participation form before the dead-line. The drawing will be supervised by a Düsseldorf notary.
At K 2001, the innovative Viennese extruder manufacturing was the first company to launch two ...
With high-performance manufacturer of extruders from Cincinnati Extrusion GmbH, Vi-enna/Austria, window professional profiles can now be produced for the first time at a speed of 6m/min. The extruder specialist will demonstrate this new dimension in high-performance extrusion to trade visitors at the K.
Argos extruders reach highest output levels thanks to the built-in 4-shaft dr...
Gericke volumetric and gravimetric feeders are running on many, various applications worldwide.
To comply with ATEX regulations, Gericke has undertaken, on all its feeders, a security assessment and got the necessary certificates by notified bodies. Feeders and loss-in-weight feeders can now be delivered for zones 1/21 and 2/22 outside, thus designed as equipment category 2 or 3, a...
Snubber Capacitor supplier for PROFESSIONAL IGBT can protect IGBT modules against voltage and current transients and applications where high dv/dt is encountered.
Voltage Range : 1000Vdc - 3500Vdc / 500Vac - 800Vac
Capacitance Range : 0.1uF - 4.5uF
A new VIBROSCREEN(R) Ultra-Clean Double-Deck Screener from Kason Corporation for scalping, de-dusting and dewatering of contamination-sensitive materials meets cGMP, 3-A, USDA and FDA standards. The unit features gap-free screen frames, quick-release “U” vices , radius corners, a domed lid, an Air-Lift device to raise the frames, continuous ground and polished welds, a gap-free and crevice-free in...
This cost-effective line is well adapted to middle size exhaust factories for emerging countries for instance.
It combines all the operations needed to prepare a blank before feeding a muffler forming line.
It allows manufacturing of aluminized or stainless steel blanks up to 800mm wide without any maximum length constraint.
...
The line manufactures the main parts included in a quick built-up supermarket shelve system i.e; shelf and back panel perforated or plain.
Manufacturing process:
The decoiling line feeds a FLEXIPRESS which performs all necessary punching operations. All necessary tooling to produce the whole part range are permanently fit...
Bug-o Systems is proud to announce the addition of an Automatic Girth Welder for professional tank fabrication applications to our product line. Unlike current girth suppliers of welders on the market, the BGW Series comes standard with a Dual Drive System. This self-propelled submerged arc brazing system can reduce field storage tank welding time up to 40%. Weld defects are greatly reduced s...
Many foundries produce a large variety of casting in each production shift. This necessitates frequent pattern changes. With the DISA Automatic Pattern Changer a pattern change only takes a minute.
The DISA Automatic Pattern Change unit provides a short cut to higher productivity for foundries with frequent pattern changes by reducing pattern plate changing time to 60 seconds (75 se...
With speeds of up to 510 moulds/hour and a machine-related mismatch of 0.10 mm or less, the DISA 231 is an upgrade of the highly successful DISA 230, and it pushes the vertical moulding performance bar up yet another notch.
The new DISA 231 takes precision and reliability to an even higher level with a number of new features including:
FDM TEAM Program is Optional Feature of new Insight version 6.0.
MINNEAPOLIS--July 30, 2007--(NASDAQ:SSYS) Stratasys today introduced Insight(TM) v. 6.0 -- an enhanced version of its pre-processing software. Insight 6.0 contains two key new production scheduling programs for direct digital manufacturing.
The production scheduling programs are FDM TEAM(TM) - a paid opt...
The premium appliance manufacturer is once again expanding its production capabilities – and once again relying on AP&T to provide them with precise, repeatable stamping capabilities.
The Viking Range Corporation has one of the most impressive reputations for style and quality in the appliance business. The Greenwood, MS company was one of the first to bring commercial kitchen perfor...
The vertical balancing machine manufacturers VPUBK is an automatic force measuring machine manufacturer , suitable for balancing rotors with reduced axial dimensions for which the only static unbalance correction is sufficient.
In particular the VPUBK30/TO is equipped for balancing brake discs with correction by milling.The machine electronic control is manufactured in order to obtain th...
A new Batch Sifter from Kason Corporation Europe meets the most stringent food, dairy and pharmaceutical standards, according to Terry Meigh, sales manager.
The dust-tight sifter has a stainless steel housing, motor and stand, tri-clover inlet and outlet flanges, vertical quick-disconnect vices and continuously ground and polished welds.
It’s not every new development project that turns established processes on their head, but according to experts, dynamic sorting is just such an innovation. The new sorting process is also expected to have long term affects on glass processing. Dynamic sorting systems, such as Bystronic’s first´sort, have everything that static systems lack: they’re fast, they’re significantly less expensive and re...
MultiNotch is a new product introduced by Multicyl for the sheet metal industry. It is a versatile and adjustable punching machine manufacturer designed to punch or notch all four corners of a sheet metal part in a single hit. Many features that make it an excellent addition to the busy sheet metal shop: - uses standard components including Multicyl industrial cylinders and unitized tooling <...
After successful field tests and end user accolades, Eriez introduces the new ProSort Metal Sorter, designed specifically to the needs of the metals recycling industry.
The Eriez ProSort Metal Sorter uses a traditional conveyor belt manufacturer and sensors to detect metals, then, instead of costly air reject systems, cost-effective electromechanical paddles are used to reject mate...
In Düsseldorf, Battenfeld Extrusionstechnik GmbH, Bad Oeynhausen is pre-senting for the first time its new BEX 2-135 V plus high-performance industrial extruder . This parallel twin-screw extruder processes PVC with the remarkably high out-put of 1,000 kg/h and thus offers an opportunity to increase performance in window profile extrusion even more.
The packaging industry is booming. Crystal-clear, thermoformed PET products are en vogue. At K 2007, Battenfeld Extrusionstechnik GmbH, Bad Oeyn-hausen, Germany is presenting a completely new, economical single-screw extruder manufacturer concept for the production of premium-quality A-PET sheet.
Planetary gear components are long-established in PVC processing. Several invo-lute-c...
Rehovot, Israel — 21 May, 2007 — Objet Geometries Ltd., the world leader in ultra-thin layer photopolymer jetting, today announced that it has opened a new business office in Germany. Objet Geometries GmbH, located in Griesheim, a suburb of Frankfurt, Germany, will professional handle all matters relating to customer support and professional resin orders for Objet’s growing customer base in Ger...
- 
- 
- 
- 
- 
- 
- 
- 
-
