A one component manufacturers of epoxy resin system called EP11HT has been developed by Master Bond Inc for high temperature bonding applications up to 205°C .It is a heat curing, structural epoxy glue featuring high shear strength and easy handling. EP11HT is formulated to cure at elevated temperatures, e.g. 110 minutes at 120°C or 75 minutes at 150°C. EP11HT attains tensile shear strengths i...
The products shown in the picture are our new NdFeB products. As you can see, they are not the normal shape like disk, block and ring.
There are two kinds of balls shown in the picture. The diameter of the smaller ones is 2mm, and the bigger one is 9mm. At present, we can produce the ball magnets with the diameter from 2mm to 53mm. For different sizes, we will adopt different machin...
GETELEC offers a cost effective solution to the problems of corrosion in salt spray and acid environments.
This is a Bi-material gasket which is composed of a conductive part and insulating part.
This combination allows to the gasket to protect itself from external environmental agression while protecting your equipment from electromagnetical perturbation.
The transformation p...
The thermal resistance of component characterizes the temperature’s increase caused by the electronic power. To decrease this resistance, GETELEC has developed a new range of thermoconductor gel which enable to avoid deterioration of your equipments. GTG offers good thermal conductivity (1 to 7 W/m.k) and a high softness (10 to 65 Shore 00). This material conforms to surface irregularities under lo...
New nanosilica filled one component UV curable epoxy called UV22 has been introduced by Master Bond Inc. This compound has been developed for coating, sealing and encapsulation applications. It features superb abrasion resistance, excellent optical clarity, low shrinkage and high physical strength properties. UV22 cures rapidly at room temperature upon exposure to a UV light source and is not professional oxygen...
The product shown in the picture is our new isotropic rubber magnets, the size of the sheet is 297x210x0.2mm, and it is the same size as the A4 paper. As you can see, the thickness of this kind of magnet is only 0.2mm, and it is only 0.3mm when coat a PVC film, the advantage of this kind of magnets is they can be put into the professional printer , you can directly print colorful pictures, logo, t...
St. Paul, Minn. – October 08, 2007 – Colder Products Company’s Thomas Braun, business unit manager for chemical handling, will speak about safety and sustainability in chemical dispensing systems at Pack Expo 2007. Braun’s presentation is scheduled for Wednesday, October 17, 11:50 a.m.-12:30 p.m. He also will be available for booth meetings (Booth # S-5529) throughout the conference.
New DrumQuik PRO Product Line Expansions are Easy to Use and Enhance System Safety
St. Paul, Minn. – October 30, 2007 – Colder Products Company announced today at the Chem Show in New York City that the company is introducing a series of product line expansions and enhancements for the DrumQuik® PRO quick connect, dip-tube closure for jerry cans, drums and IBC’s which facilit...
The PIPETBOY acu Pipettor from INTEGRA Biosciences is a lightweight, single-channel professional dispenser for safe, accurate and reproducible filling and dispensing of plastic and glass pipettes from 1-100ml.
The unit is ergonomically designed for ease of handling and use. Aspirating / dispensing speed can be continuously adjusted using the thumbwheel dial. Touch-sensitive butto...
In the third quarter of 2007 TMI, LLC made their third major acquisition, a state-of-the-art extrusion company with a capacity of more than 60,000 lbs. (27,200 kg) per day. Extrusion capabilities include flexible PVC strip and sheet as well as rigid PVC sheet and widths from 4 inches (10cm) to 60 inches (152cm) and thicknesses from 40 mil to ½ inch thick. This will allow TMI to control their high s...
This picture is our new AlNiCo pot magnet with countersink , it can be manufactured into different sizes. If you want to purchase this product or if you want to know further technical information, please do not hesitate to contact us.
Herein after is the regular demesions of the assembly.
Nida-Core Corp. has greatly expanded the composite panels offerings by adding NidaFoam PET 100 structural composite panels to its lineup. NidaFoam PET offers M1 burn certification and excellent fire resistance characteristics. Panels are available from 1/4” to 8” thicknesses in sizes up to 10’X50’. Panels are manufactured with wet lamination technology under controlled vac...
The Bergquist Company announces the availability of its latest Sil-Pad product, Sil-Pad 1200. It is a silicone based fiberglass-reinforced thermal interface material, featuring an optional professional adhesive coating. The material's smooth and non-tacky surfaces allow for easy re-positioning and error reduction in assembly.
Sil-Pad 1200 is supplied without a liner in dry form and on a ca...
This picture is our new AlNiCo assembly, it can be manufactured into different size. If you want to purchase this product or if you want to know further technical information, please do not hesitate to contact us.
Setral – a member of the ECCO group - develops and produces high-performance lubricants for the industry.
As your partner we are able to manufacture your products promptly. Our high-end production center meets all update standards and regulations. The considerable extension of our production plant in 2006/2007 allow us to increase the toll manufacturing and aerosol filling for pr...
... Master-Bond EP30D-12 is a two component elastomer combining characteristics of epoxy resins such as industrial adhesive strength, and chemical resistance with those of the polyurethane¡¯s, including abrasion resistance and flexibility. The outcome is a product with 7500 psi tensile strength and flexibility of 440% elongation. EP30D-12 exhibits excellent resistance to thermal cycling, chemica...
SAFEMAG pipe magnet for applications in the plastics industry will be presented at the K 2007 trade fair
At the K 2007 plastics trade fair, hall 10, stand E60, S+S Separation and Sorting Technology GmbH will launch a new member of the magnet family, the SAFEMAG. The SAFEMAG system has been developed in close cooperation with customers from the plastics industry.
In practice the preservation of metallic blank and highly polished surfaces of moulds, tools and equipment very often proves to be difficult.
Regardless if oil or wax based products are used, high scrap is caused, costly subsequent cleaning is necessary and insufficient corrosion protection of
moulds and tools is given.
PRO-PL 941 is our new, innovative grease-like co...
- 
- 
- 
