These rotary vane compressors with installed power of 55 and 75 kW are available in ERC versions. They are compact, reliable and perfect for industrial use 24 hours a day.

The air is sucked by means of a filter and passes through a modulating proportional valve that regulates the air delivery according to the demand. This valve automatically maintains the working pressure at constant levels.

Therefore, the air enters the compression chambers or vanes that the stator, the rotor, the blades and the covers have formed. This rotor is installed eccentrically to the stator and is equipped with longitudinal grooves in which the blades slide. It is the centrifugal force that pushes the blades against the stator's wall.

An efficient oil injection system guarantees cooling, lubrication and a perfect holding among the moving parts. An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades..

Air compression is triggered by the volume reduction of the vanes in the stator during rotation. By passing through mechanical and coalescing separation stages, the mixture of compressed air and oil is purified until the maximum oil carry-over in the air does not exceed 3 ppm (parts per million).

Finally, the air is cooled in the radiator and the condensate is eliminated by a condensate drain.