193 press releases : Pumps, Compressors

Ogura’s new series of mobile electromagnetic clutches provide quick and easy engagement and disengagement of pumps, engine cooling fans or other accessory drives. Torque ranges from 100 lb. ft. to 1500 lb. ft. Large bearings and a single piece bi-directional spring help the clutch to withstand heavy vibration. Most units have a single piece construction, which makes for easy mounting of pumps an...

EHM Series slurry pump is mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller...

Low cost with high standards – APV’s new PUMA+ centrifugal pump for standard duty applications. APV, an SPX brand, is delighted to announce the launch of its new sanitary PUMA+ range of single-stage end-suction centrifugal pumps. The PUMA+ joins the established APV portfolio of sanitary centrifugal pumps, which includes the comprehensive W+ range of premium sanitary end-suction centrifugal pu...

Viking releasied a 125 LPM version of the Composite Mag Drive, a series of sealless, non-metallic pumps specially designed for corrosive chemicals, volatile organic chemicals, and flammable liquids. Due to the CMD’s engineered-fluoropolymer and ceramic-wetted material design and construction, this series of pumps can handle Hydrofluoric Acid for alkylation of refined fuels, Aqua Ammonia for NOx re...

Introduction: Plate liner is also one of wet parts of slurry pumps. It forms a pump chamber with throatbush and frame plate liner insert and so slurry will wash them. Excellence Pump offers all metal wet parts with high chrome white iron ('chrome).The high chrome white iron is a very good wear-resistant material and nice wear-resistant is slurry pumps important character.

On November 17, 2008, Graymills Corporation announced the hiring of William Morrissey as Director of Sales. With sixteen years in inside and outside sales and management, Bill brings extensive experience and leadership skills to Graymills.

Nitto Kohki’s VC0100 is characterised by its suitability for many varied applications. It is compact, lightweight, silent (35dB) and with a performance of 6 l/min at 40mbar, yet with a power consumption of only 6W it is becoming a very attractive solution for OEM’s. Due to its low power consumption it has generated significant interest where low power consumption is important, e.g. in mobile fuel ...

KCL has poured over 10 million U.S. dollars in equipping the most advanced high tech facilities for machining our high-pressure fixed displacement and variable pumps. KCL's continuous dedication with utmost efforts and hard work from our R&D team have made it possible to offer our customers best solution and provide them with faultless pumps. KCL brings the materials from Sweden and J...

New Revolutionary Electric Driven Gas Booster Packages rated to 6000-psi manufactured by HII Compresses Breathing Air, Argon, Helium, Nitrogen, Oxygen and all other dry non-corrosive gases up to 6000-psi (Oxygen is limited to 4500-psi) from as low as 50-psi. Ideal for maximizing the use of gas in storage cylinders resulting in an increase in the number of complete fills per storage cylinder. Red...

KD Scientific has released the Model KDS 310 Plus, a Nanoliter Syringe Pump augmenting their broad line. This NEW Nanoliter Pump works with syringes from 0.5 ìl up to 250 ìl with accurate “pulseless” flow delivery from 1 nl/min to 363.7 ìl/hr. The KDS 310 features a unique remote injector which allows the user to deliver small volumes without wasting precious fluids in excessively long tubi...

The pumps are based on the geometry and properties of the cycloid. In fact, they are lobe pumps (or internal gear pumps). All of the main components are made of sintered materials. In the development of these two types of technology, we have given an emphasis to high performance in terms of capacity and pressure in proportion to the pump size (owing to the reduction in unused volume), as well as to...

Excellence Pump Industry Co., Ltd is a professional slurry pump manufacturer in China. With the accumulation and development of years, we have formed a complete system of slurry pump design, selection, application and maintenance. We are devoting on offering the solutions of slurry pump application in the world. Our products are widely used in mining, metallurgy, coal washing, power plant, sewage w...

HANNOVER MESSE remains the world's leading showcase for industrial technology. Better, faster, more effective: to survive and prosper in the face of global competition companies need to constantly maintain and improve their performance potential. Leading-edge technology plays a pivotal role in corporate competitiveness. HANNOVER MESSE 2009 takes place from 20 to 24 April 2009. Sjerp & Jo...

The set-up of the max relief valve has never been so easy on the UP Ultra Air Pump types by BELL as it is now! Through an easy operation which just takes a few minutes it is now possible on every UP Ultra Air Pump type to adjust the internal max relief valve directly from the outside. This ensures a rapid configuration of the pump according to the application or it helps to use the same pump on di...

Significantly higher turnout and fascinating technology displays at this year's HANNOVER MESSE HANNOVER MESSE 2008 consisted of 10 international flagship trade fairs. The 5,100 participating exhibitors from over 60 different nations offered an impressive demonstration of the industrial state of the art. Visitor numbers surged to around 200,000 - an increase of approximately 30 percent over HANNO...

Totally Yours You won’t have to go anywhere else to find a total solution for your pump station. We have everything you need, including a wide range of pumps for dry installation. We bring convenience to everyday life. And we welcome our customers to a pleasant world.

In cases where tradionotal Teflon lining does not resolve your problem, you might consider using Roto moulding. Rotomoulding is nowadays frequently used in machined parts, pumps and valves. Materials like ETFE (high density, low friction), PFA (high temperatures) and PP (chemcial resistance at low temperatures) migth eb considered. We have a lot of experience especiallly in the Petro chemical ind...

Peristaltic pump company rebrands Autoclude Pumps is now a division of Verder Limited, a move that is not only beneficial to both companies but also to its customers as well. “With virtually no product overlap, the Autoclude brand represents an attractive complement to the products in our liquids division”, said Andries Verder, CEO of the Verder Group. The combined attributes of these two compan...

Larox LPP-D15 was chosen for pumping Poly Glycol in the USA as reliability and accurate dosing was required in a cement making process. Poly Glycol is added to the cement prior to the final grinding circuit. The customer was gravity feeding using a manual valve for controlling the grinding aid to the circuit and was not satisfied because they could not properly control the dosage. As already bei...

A worldwide oil producer has chosen Larox LPP-M pump to meter thinning agent additives to oil well heads. The Larox LPP-M was chosen due to its overall reliability, dry run capability and ability to produce accurate metering. Thinning agent additives such as xylene and naphthalene aid in cleaning of producing oil wells to increase their daily production. These thinning agents are accurately mete...