The EP4 pumping is an ideal prelube oil pump for large engines, but it is also a great oil or fuel transfer pump for limited duty cycle applications. It performs well with high viscosity professional oils . As a volumetric pump it will self prime but is more efficient and quieter than a manufacturers of gear pump . Anywhere you need to move oil or fuel around you can do it easily and safely w...
Introduction:
Type SP pumps are vertical, centrifugal slurry pumps submerged in sump to work. These pumps have no need of any rod seal and sealing water. They can also be operated normally for insufficient suction duties.
The pumping casing of type SP pumps are made of wear-resistant metal and the impellers are made of wear rubber or poyure.
Infinitely variable speed controller to transferring liquids in small amounts.
Pumping tube without grease fillings, thus no contamination of the liquid.
Different lenghts of 500, 700 and 1000 mm for the use in small vessels up to a 200 l professional drum .
Wide range of applications by sealless cons...
Ideal for chemical recirculation and feed
For high system pressures
Patented, oil-free cock system
Max-Pass™ valve system
Increased suction lift
Large solid particles posible
For abrasive fluids
...more
Marking an industry first, onboard pumping intelligence is now a standard feature of the world’s most popular industrial process pump ; the ANSI Model 3196 from ITT Goulds.
The new i-FRAME provides operations personnel, maintenance managers, and reliability engineers – the people responsible for monitoring and repairing rotating equipment on a 24/7 basis...
ITT ProActivitySM Saves Millions in Energy, Maintenance and other Costs
Process plants with large populations of pumps can save millions of dollars in operation and maintenance costs using a suite of pumping -optimization services announced today by ITT. ProActivity provides a three-phased approach to reduce the total cost of pump ownership. It brings together multip...
In April, Oerlikon Leybold Vacuum delivered the first cryogenic pumps with a suction volume of 60,000 liters/s produced in the new Cryogenic Centre in Dresden to an Indian customer. The performance of these pumps exceeds all known high suppliers of vacuum pumps by far. With a flange diameter of 1.4 m, this pump also impresses by its outer dimensions.
The SC 920 Suppliers of vacuum pump system from KNF Lab comes equipped with wireless professional remote control . This feature eliminates the need to set up the system near the process apparatus and provides previously unheard-of flexibility in the laboratory. What's more, the system can now be tucked away inside laboratory furniture or placed underneath a fume hood without the hassle of runnin...
ECOFIT extends its range of backward curved professional fans , with the combination of a new EC technology motor. EC fans advantages are numerous: low running costs, speed control, ease of control, high efficiency and long life expectancy.
Equipped with a 92mm diameter external rotor motor and associated to 192, 220 and 225mm diameter impeller, these fans offer higher efficiency t...
Prospective customers considering purchase of submersible industrial mixers have always had a problem comparing and measuring performance. Traditional industry-wide specifications based on power input per volume do not take other important factors into account, like propeller efficiency and hydraulic results.
So independent experts from ITT Water & Wastewater joined hands with the ...
For many applications in the laboratory such as drying processes, distillation or sample concentration, chemistry industrial diaphragm pumps in combination with electronic vacuum regulation provide the optimal solution, especially if simultaneous fast and careful evaporation is needed. Users desire on the one hand fully automatic vacuum control with high process safety, whilst on the other hand, ...
Tikkurila, Finland based paint producer, installed the first Larox LPP65 pump in 2006. As a result of good experiences of the Larox pump technology, three LPP65 and four LPP40 pumps are successfully operating today.
The Larox LPP40 pumps are feeding emulsions to the dissolvers and to the finishing tanks whereas the LPP65 pumps are feeding colour paste from the dissolvers to the fini...
In 2005 Larox Flowsys supplied 2 Larox manufacturer of peristaltic pumps (LPP40) and a Larox PVEG/C cock to Delta Chemicals, a leading chemicals manufacturer, located in Maryland, USA. The LPPs pump water based aluminum trihydrate solids carried by aluminum chloride and aluminum trihydrate solids carried by aluminum sulphate. A 50 mm Larox PVEG/C valve is utilized for pump isolation.
Non-metallic pumps are used for pumping a variety of fluids. Non-metallic pumps are especially suitable for pumping dangerous, corrosive or abrasive fluids. Examples of these fluids are acids, solvents and caustics, such as hydrochloric acid, sodium chloride and citric acid.
For pumping these liquids in an explosion proof environment it is necessary to comply to Atex. Verder has exte...
The quick suctioning immmersion pump SZ 5016 rounds off the top end of our range. It has all the positive characteristics of its little sisters, but the decisive feature is the enormous delivery volume of the SZ 5016, making it ideally suitable for use in heavy metal cutting machines . Configure your own individual SM with the assistance of our application engineers.
With the development of the technology, our company has introduced the series ZJ slurry pumping under the theory of modern fluid mechanics and mechanical, based on the professional software design and practical experiences.
The ZJ series slurry pumps are designed as single-stage, single-suction centrifugal pumps supplier .They are classified into the horizontal version (ZJ type)...
Introduction:
In order to meet the requirements on the development of mining, the power station , metallurgy and coal industries, our works has designed and developed Series ZGB (P) Generation Raw sewage pump with large capacity, high head, multi-stages with experience of slurry pumping design and manufacture for many years, and absorbing the research results of advanced technology from...
Lappeenranta, Finland (February, 2008) – Larox Flowsys. One of the largest global paint and coatings manufacturer has selected a Larox LPP-D to pumping latex primer. The Larox pump was chosen over the competition due to its ability to continuous operation without inducing frictional heat and its no shear capabilities.
Larox LPP-D15 peristaltic pump is being used in a testing lab wh...
Lappeenranta, Finland (February, 2008) – Larox Flowsys. Larox Flowsys, the preferred supplier of cutting-edge flow control technology, has supplied eight LPP65 pumps to Alcro-Beckers, a leading Swedish paint producer owned by the Finland’s biggest paint company Tikkurila Oy, which is part of Kemira Group. The Larox pumps have been successfully operating since the start up of a new Latex paint facto...
Rotary vane vacuum pumps are frequently used to generate a vacuum in the range of 1 mbar to 10-3 mbar, ...
An effective corrosion reducing strategy has been implemented in the new VACUUBRAND Chemistry Hybrid Pump RC 6. It is based on its predecessors RC 5 and RC 4, proven in ...
- 
- 
- 
- 
- 
