Toronto, Ontario - Winters Instruments’ Safety Case Gauge is designed to be used where safety is a major concern. With a solid front and blowout back, this gauge features a 0.5% ANSI/ASME Grade 1A accuracy, full rotary movement and a manufacturers of micrometer pointer for easy calibration. The 4.5" di...
INTACTON GmbH, a subsidiary of the FRABA group, has developed an optical movement sensor which enables reliable speed and length measurement on rugged or structured surfaces and ensures careful material handling . Thanks to its non-contact measuring method, the OPTIPACT sensor is suitable for yard goods such as cardboard or corrugated board which are problematic for conventional industrial measuring systems...
Schleuniger’s PullTester 20 is a, motorized, bench-top unit designed to measure pulltest forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range than single-range pull test devices. These measured values are indispensable parameters (IEC 60 352-2 standard) for quality control and assurance. The IEC standard specifies that the pull tester measures with a con...
Crystal Engineering Corporation, a leading pressure instrumentation company, has developed the XP2i-DP, a new digital Wet/Wet differential pressure gauge with 0.1% of reading accuracy. The XP2i-DP is very rugged, intrinsically safe, ATEX certified, high accuracy long term vacuum measurement.
Most wet/wet differential gauges are damaged when the media leaks on the low pressure side as a resul...
Grabner Instruments (Austria) launches MINIVIS 445, an automatic, portable Micro-Viscometer for the determination of the viscosity of fuels, professional oils and petrochemical products, as well as other liquids such as milk or coffee cream.
MINIVIS 445 combines a falling ball viscometer with an advanced density meter , an automatic filling system and a very fast temperature cont...
Vögtlin Instruments is presenting new flow systems for OEM-applications at the Sensor+Test 2008.
Sensor+Test is the International Trade Fair for Sensorics, Measuring and Testing Technologies in Nürnberg (Germany)
Visit us at Hall 7, Booth 7-119
Please contact us for free admission tickets: Phone +41 61 756 63 00
The SET X total station incorporates the latest technology with the traditional surveying functionality. The rugged high-performance SET X is available in 1", 2", 3" and 5" models for use in a wide range of positioning applications. The 1" and 2" models also include Sokkia's absolute encoders , but they are extra enhanced with Sokkia's Independent Angle Calibration System (IACS) to provide extre...
Ideal For Flocculation, Sedimentation Removal and Filtering Operations
With its advanced multi-point flow measurement technology, the versatile Multi-Mag Flow Meter offers exceptional accuracy and ease-of-use over a wide flow range under rugged conditions that include the presence of sand and grit in converting raw ground water to potable drinking water.
Ideal for Measuring Wet Gas, Condensate & Dirty or Abrasive Flows
Engineers in a tight spot over where to locate liquid and gas flow meters aboard Offshore professional platforms , FPSO Vessels and Sub-Sea Installations will find the self-conditioning V-Cone® Offshore Flow Meter requires a pipe straight-run that is up to 70-percent less than other meters, resulting in significant r...
Brooks Instrument is pleased to announce the release of an enhanced version of its Smart DDE software which has been updated to be fully compatible with Microsoft® Windows 98, Windows 2000, Windows XP, and Windows Vista. Brooks Smart DDE software for Microsoft® Windows™ is a translation program, or driver, that makes it easy to communicate with the Brooks line of digital mass flow meters and contro...
Brooks Instrument is pleased to announce that its line of weatherproof thermal mass flow meters and controllers now conforms to the Ingress Protection (IP) IP66 classification set forth by the International Electrotechnical Commision (IEC) . This product line includes models SLAMf, MfxxS, Mfxxi, and MfxxX. Brooks was the first mass flow measurement and control provider to introduce a weatherproof /...
With roughly 20,000 measurement values, exactly 160 x 120 pixels interpolated to 320 x 240 pixels, the thermal imager testo 880 allows reliable diagnoses on a crystal clear 3.5“ display. The screen is fully used without any limitations due to menus.
The visibility of even the smallest temperature diffferences is guaranteed by high-quality germanium optics with optimum IR exploitation...
FUTEK Advanced Sensor Technology, Inc (www.futek.com) is pleased to announce the addition of their new custom designed INSTRON Model 600LX Hydraulic Test machine to their A2LA 17025 certified calibration department. This addition will increase FUTEK’s testing capacity to 130,000 lbs (58,967 kgs, 578KN) in tension and 400,000 lbs in compression in a single test space design. This allows FUTEK te...
SFIM's SFT series meters are direct acting indicating analogue electrical measuring instruments. They are suitable to be used on the distribution, control panel of power plant and the different apparatus to measure the DC/AC current, voltage, frequency, power and reactive power, power factor, synch roscope, phase indicator and the other non-electric value.
Does your instrument need regular checking, validation and calibration? Do you need cost effective service that is fast, high quality, traceable and accredited? Do you need clear and concise calibration certificates?
Endress+Hauser cover all these critical aspects, and can perform and advise on all aspects of calibration from in-situ testing through to fully accredited factory calibration.
For sizing of a measuring point for interface measurement the process conditions must be verified carefully. Only then, a decision in relation to the appropriate instrumentation can be made. Endress+Hauser offers you several measuring methods for interface measurement, in each case adapted to the special requirements of your application. Guided radar, capacitance or radiometry - we lead you through...
HV TECHNOLOGIES, Inc. (HVT) recently entered into a distribution agreement with BAUR Prüf- und Messtechnik GmbH, Germany, world-renowned experts in the fields of VLF Cable Fault Location and Dielectric Insulating Material Testing, to sell and service the BAUR products in the United States.
Alain Bolliger, CEO of HVT, states, “ This new relationship with BAUR and their reputation of h...
FARO announces the release of the all-new Industrial laser ScanArm V3. This new version of the already popular FARO Laser Line Professional probe delivers the latest improvements in performance and portability. With 30-percent more accuracy, 33-percent lighter weight, and better performance in scanning dark or reflective surfaces than our V2 model, the new V3 takes non-contact measurements to t...
Anton Paar is proud to present the High Throughput Rheometer (HTR). A solution that completely holds its own - a fully automated, robotically operated rheometer. Not losing an ounce of MCR 301’s world-renowned accuracy – yet giving customers back their entire working day.
Measuring reproducibility is key. Economy and high productivity are essential. Ease-of-use is a major plus. Ant...
- 
- 
- 
- 
- 
- 
- 
- 
-
-
-
