The precise flow measurement in partially filled channels and rivers is one of the most challenging tasks. You will find a typical application below.
Monitoring the Outflow of a Hydro Power Plant
Monitoring of navigability, Flood protection and Environmental Protection: These are all big tasks which depend on reliable and precise flow data. At the moment, the flow in b...
Ideal For Hydrogen, Natural Gas, & All Other Gases in Chemical Processing, Electric Power, Food/Beverage, Oil/Gas Refining, Metals and Manufacturing Plants
Engineers and technicians seeking a highly-accurate, reliable mass flow measurement solution for hydrogen, natural gas, and other gases in small line processes and for skid-mounted equipment assemblies will find the new ST75V™ Air...
Ideal for Measuring Wet Gas, Condensate & Dirty or Abrasive Flows
With its advanced space-saving design, the new high accuracy V-Cone® FPSO Flow Meter is the ideal liquid, gas or steam measurement solution for cramped Floating Production, Storage and Offloading Vessels operating in deepwater or remote areas.
The V-Cone’s unique no-moving parts design provides built-i...
Agriculture, Amusement, Horticulture, Irrigation, Institutional Facilities, Municipalities, Processing Plants, Recreation, Reclamation, Turf Farms, Water and Waste Treatment
With an advanced low power microprocessor design, the new digital FlowCom™ Register from McCrometer provides simultaneous flow rate and volumetric totalized flow data for McCrometer’s popular Mc® Propeller Series...
Bronkhorst High-Tech announces the release of a new option for its LIQUI-FLOW® series mass meters and controllers for low flow rates. The instruments are now available in compact, rugged design according IP65 (dust- and waterproof) and ATEX approved for use in Category 3, Zone 2 hazardous areas. The liquid flow meters and controllers cover flow rates from 0.25 g/h to 1 kg/h and can be used in appli...
As an enhancement to Airbus voltage spike tests the AMD-24C standard has been introduced specially for the A350XWB aircraft. The 2/10us, 2/50us, 2/100us, 2/200us and 2/400us voltage spikes are applicable to single phase and three phase AC as well as DC interfaces. EMC Partner’s Fx-AMD-24C, is a “plug and play” extension to the already popular MIG2000-6 test system. The generator has output impedanc...
The introduction of IEC61000-4-18 Ed1 increased the damped oscillatory test frequencies from the existing 100kHz and 1MHz by adding "Fast waves" at 3MHz, 10MHz and 30MHz.
These additional frequencies have been introduced to keep pace with the new SF6 insulation technology being introduced into electricity sub station equipment.
EMC Partner has already been selling the "Slow waves" 10...
The new measuring instrument ALMEMO2490 is the top model for the measurement of different flow rates of air and professional gases . A range of impellors, thermal anemometers and pitot tubes are available, offering a measurement range between 0.05 and 90 m/s. The high quality measuring technique offers the best accuracy and can be supplied with a calibration certificate if required. In particula...
Reliable accuracy of humidity measurement presents many physical challenges as sensors working at high humidity over a long term require regular calibration checks, and often need replacing. New pioneering digital technolgy now makes it possible to store all the sensor characteristics in the humidity sensor itself. This means that an easy and inexpensive exchange can be made at any time locally wi...
INTACTON GmbH, a subsidiary of the FRABA group, has developed an optical movement sensor which enables precise non-contact length and speed measurement of sensitive yard goods (e.g. textiles, coated or sticky surfaces, steel wool and foam rubber). The new OPTIPACT sensors are maintenance-free and similarly priced to conventional, contact-based industrial measuring systems consisting of measurin...
The new KONICA MINOLTA RANGE 7 non contact 3D digitizer will greatly enhance the possibilities of non-contact Three dimensional measurement with unique features as well as top reliability, operability and transportability.
The highlights:
1. Robust design with 40 micron accuracy and a 1.31 million-pixel sensor!
... Instruments (Austria) introduces another milestone in color scale testing. The fully automated tristimulus filter chroma meter MINICOL was specifically designed to offer precise color measurement of liquid samples at an affordable price. MINICOL is used for color testing especially in the petroleum industry.
MINICOL comes factory calibrated to measure the color of liquid petroleum products a...
(Heerbrugg, 24 September 2007) With the new Leica TPS1200+, Leica Geosystems introduces its most competitive total centre ever.
Measurements to inaccessible or hard-to-reach targets more than 1000 meters away are easy now – even without reflectors, and in true PinPoint accuracy. With its combination of range, accuracy, professional laser dot size and measurement time, the Leica TPS1200+ ...
The optris CTglass is designed for accurate glass temperature measurements on flat glass lines, industrial container glass machines, in the industrial bulb manufacturing, car glass finishing and the production of solar panels in the temperature range of 100 up to 1650°C.
The measuring wave lenght of 5,2µm provides a low depth of penetration for the infrared measurement , becau...
The optris CThot allows temperature measurements and the use of the IR sensor head under environmental temperatures up to 250°C without any need of cooling.
The narrow beam optics of these sensors with a high optical resolution of 10:1 allows oblique aiming to avoid material dependent temperature readings.
A response time of 30ms is a big benefit and is setting a be...
ATEQ is offering a new high-precision instrument, the H2LD detector, to locate and measure leaks using the hydrogen method.
The device uses a tracer gas composed of a mixture of 5% hydrogen and 95% Nitrogen, to detect a sealing fault from 1x10-7 atm.cc/s.
- Non-destructive testing,
- Leak detection ,
- Sealing control,
- Leak localization,
- Object v...
Since most moisture analyzers only conduct random spot checks, Sartorius designed the PMD300 moisture professional analyzer series especially for online analysis. These new machines provide the user with a complete overview of the current state of a production process or the state of a batch. Thanks to the use of microwave resonance technology, the user continuously receives the moisture conten...
Integra Biosciences has chosen Analytica 2008 as the venue to preview two exciting new products.
Visitors to Stand 505 (Hall B1) will be able to see the new generation FIREBOY, an intrinsically safe and mobile alternative to the traditional Bunsen industrial burner . Operating from a gas cartridge and powered from a rechargeable cell the new robustly designed FIREBOY range can be...
In collaboration with the DGZFP we will continue our successful courses on mobile hardness testing in 2008. In the three day seminars participants will learn about the theoretical and practical basics of mobile hardness testing. In practical exercises with different mobile devices they will also learn about specific testing difficulties. The course is completed with an exam and certificate. You can...
Three years ago, Memosens sensor technology revolutionized the world of analytical measurement technology. Many companies in the chemical, pharmaceutical, food and wastewater technology sectors have already been very successful in switching their plants around the world to Memosens, thereby creating a new factory standard. More companies are planning to make the switch and to use Memosens technolog...
- 
- 
- 
- 
- 
- 
- 
- 
-
-
-
