684 press releases : Test and Measuring Instruments



Search - News   Go


Releases  561 -580
Date 2007-10-01 DWYER

Current & Voltage Calibrator

Dwyer Instruments, Inc., the preferred source for your complete range of practical and affordable instrumentation, is announcing the release of its NEW Model CSG Current and Voltage Professional calibrator . The pocket size Model CSG Calibrator is an ideal tool for troubleshooting industrial transmitters , transducers , motors, and actuators .

The Model CSG generates a 0 to 10 VD...


Date 2007-10-01 DWYER

Series PTGA Differential Pressure Piston-Type Gage

Dwyer Instruments, Inc., the preferred source for your complete range of practical and affordable instrumentation, is announcing the release of its NEW SERIES PTGA DIFFERENTIAL PRESSURE PISTON-TYPE GAGE.

The Series PTGA can be used to measure the pressure drop across professional filters , strainers, pump performance testing, and suppliers of heat exchanger pressure drop monitorin...


Date 2007-10-01 SARTORIUS

High-precision batching in hazardous areas

...with Sartorius IS-X Series weighing platforms

Fast, reliable and remarkably accurate: the IS-X Series of intrinsically safe weighing platforms from Sartorius is designed for sophisticated batching applications in hazardous areas in which combustible gases and/or dusts may be present. Thanks to ATEX, FM and CSA certification, they are approved for use both in zone 1 and 2 hazardou...


Date 2007-09-27 Mecmesin

Solenoid Testing Triumph

Leicester-based solenoid manufacturer, Parmeko, has recently been provided with a unique force testing solution to perform quality control assessment of their products on the factory floor.

Parmeko designs and manufactures proportional solenoids , on-off solenoids and holding magnets used in mobile and industrial fluid power applications.

They required a customised t...


Date 2007-09-27 OROS

NEW ! OROS introduces the Mobi-PackTM

The first multichannel field analyzer and professional recorder for vibration diagnostics
Rough, Rugged and Real-Time without compromise


The Mobi-PackTM is a 16 channel all-in-one vibration analyser , specially dedicated for the tough field environments. The Mobi-PackTM is designed for vibration specialists traveling everywhere to troubleshoot vibration issues from ...


Date 2007-09-27 OROS

Balance in a snap with Version 3

With the release of version 3, OROS goes one step further improving its Balancing Solution. The dedicated interface progresses with one objective: letting the order tracking analysis power of the OROS 3-Series industrial analyzers at the service of an easy and efficient balancing process. Based on the field feedback, V3 brings a whole set of new features improving continuously its ergonomics: bal...


Date 2007-09-26 Beamex

Beamex’s corporate-wide calibration system for Scottish & Southern Energy

Beamex Limited (UK) made recently a major contract to provide a new corporate-wide professional software -based calibration system for Scottish and Southern Energy. The contract includes several Beamex® CMX Professional reference software licenses. The new system will be used at 11 Scottish and Southern Energy sites in the UK.

Installing and utilizing this new system will provide ...


Date 2007-09-26 Beamex

Beamex provides an integrated calibration solution for EPR Elean power station

Beamex have recently been contracted by EPR to supply their world-class integrated calibration solution for Elean Power Station – the world’s largest straw burning power station creating 38MW from burning 200,000 Tons of cereal straw every year.

Beamex are proud to be part of this fantastic project helping create power for the UK from a renewable source.

The integrated...


Date 2007-09-25 FARO Europe

FARO unveils its most advanced portable CMM ever: The Quantum FaroArm

FARO announced the release of the FARO Quantum FaroArm – the first 8-foot arm proven to measure accurately to within .0007”; a fifth the width of a human hair.

“True to our commitment of making our customers’ products and processes the best in the world, FARO once again delivers the most advanced portable arm CMM ever – the Quantum FaroArm,” FARO President and CEO Jay Freeland said. ...


Date 2007-09-25 Shanghai Hualong Test Instruments

WSC Computer Controlled Relaxation Tester(100, 200, 300)

Having relation curve for residual testing force of stack ratio and time,meanwhile having relation curve for temperature and time.
œ Able to reckon stress slack performance lf specimen for 1000 hours.
œ Free setting of loading velocity.
œ Able to automatically calculute stress slack performance of specimen ( such as stress slack ratio ,slack stress,slack ratio,etc.) and ...


Date 2007-09-25 Metrohm

New: Metrohm extends its warranty!

The products of Metrohm are «Swiss made» and meet the highest quality standards. Furthermore, our competent support and fast service has been at your disposal for decades!

Surveys confirm the satisfaction of our customers and underline our addiction to quality. We trust in the reliability of our products and therefore give a three year extended warranty on all Metrohm devices.
...


Date 2007-09-24 Optech

Optech Announces New Profile Scanning Feature for the ILRIS-36D Scanner

Toronto, Canada – Optech Incorporated, a provider of advanced lidar survey instruments, announced today a new Profile Scanning feature to be implemented with its ILRIS-36D industrial scanner .

Profile Scanning will significantly reduce scanning time and decrease operator post processing time, especially for building interiors and extremely large infrastructure projects. By automatic...


Date 2007-09-24 Kern & Sohn

KERN NTNN Drive-through-scale - Super low construction, platform height is only 45 mm

This is basically the low rider of all floor scales . This super flat drive-through-scale enables quick loading and weighing of a load. Ideal for weighing mobile boxes, industrial carts , mobile professional container , etc. All models are well protected against dust and water splashes (IPS 65), are extremely robust and can be used, thanks to the EU verification, in commercial sectors


Date 2007-09-20 SCHENCK RoTec

For the best moments – New moment scale for turbine blades

Fluid dynamic engines such as steam and gas turbines and jet engines, the blades make up a substantial proportion of the rotor mass, and therefore significantly affect the unbalance. Outwardly identical blades vary so much in mass and centre of gravity that when mounted on the turbine hub in random sequence substantial unbalances and internal moments occur. In many cases such randomly mounted bla...


Date 2007-09-20 SARTORIUS

pH-meter, Conductivity meter and Ion Meters with Intelligent Technology

Sartorius PP

Stabile measuring results, secure data management and timesavings coupled with optimum user convenience. Such features not only dictate everyday routine in the professional lab, but are also embodied by the new generation of Sartorius Professional Meters.
The laboratory technology supplier Sartorius has re-equipped and optimized the PP meter family. Out of these ...


Date 2007-09-18 Industrial Scientific

Industrial Scientific Adds New “Bump” Test Feature to the GasBadge® Line of Single-gas Detectors

PITTSBURGH, PA, USA – 13 Sep 2007 – Industrial Scientific, a global leader in industrial gas detection and monitoring instruments, systems and related services, is pleased to announce a new “bump” test feature for the GasBadge® line of personal and dockable single gas monitors.

Driven by customer feedback, this feature is designed to increase safety by encouraging and facilitating ...


Date 2007-09-17 Barksdale

New Level Switch UNS1000-BN18 TC in telescopic design

Flexibility is the key word for the new level switch UNS1000-BN18 TC from Barksdale. Based on a telescopic design, this allows easy setting of any level in hydraulic reservoirs and enclosures. A second advantage is a reduced inventory holding because a fewer number of professional switches need to be stocked to cover individual OEM requirements.

The incorporation of a temperature switching...


Date 2007-09-17 Barksdale

Contact-free level indication for OEM applications

ULS7 is the new industrial OEM level switch from Barksdale combining the advantages of the ultrasonic measuring with the well-known functions of our electronic pressure and flow switches.
The ULS 7 may used in numerous level applications including machine tools, hydraulic systems and laboratory equipment.

The ULS7 is of rugged construction with stainless steel connections acco...


Date 2007-09-17 IMPAC Infrared

Temperature Calibration Sources

The calibration sources from IMPAC and Mikron are infrared professional radiators with fixed or adjustable temperatures between -40 and 3000°C, which are used for the calibration or verification of the correct temperature-indication of pyrometers , thermal imaging systems, heatflux measurement systems or spectrographic analysis systems. Depending on the model of the calibration source single t...


Date 2007-09-17 JUMO

Safety temperatur monitors an limiters with SIL an EN 14597 certification

In order to eliminate potential dangers in plant and processes, or to reduce them to a tolerable risk for people, material assets and the environment, it is necessary to use functionally safe devices.
Safety temperature monitors and limiters from JUMO are products that are developed especially for the sector “Temperature limiting devices for heat generating plant”. They reliably fulfill thei...


- - - - - - - - - - - - - - -
- - - - - - - - - - - - - - -
- - - -