192 press releases : Valves, Piping, Pipe Fittings

SIPOS 5 Flash variable speed actuators have been installed at a combined heat and power (CHP) plant in Germany. The CHP of the Rosenheim municipal utility is a gas, fuel oil and waste-fuelled plant that incinerates domestic and industrial waste to produce energy for power generation, process steam and district heat. The CHP converts approximately 60,000 tons of domestic and industrial waste into en...

NORRES, Gelsenkirchen, comes out with two new hose all-rounder for the food industry. The highly flexible NORFLEX® PUR 401 MHF and NORFLEX® PUR 441 MHF of premium polyurethane Pre-PUR® supplement to the wide range of products of the FDA hoses. Thanks to its reinforced wall NORFLEX® PUR 441 MHF resists higher working pressure. It is the research and development department of NORRES which has int...

NORRES WELLFLEX® protection conduits PVC 111 and PUR 118 are checked and certificated successfully approved to DIN EN 61386-1 und DIN EN 61386-23 (flexible rigid conduit systems for electric energy and for information). From now on the highly flexible plastic conduit WELLFLEX® PVC 111 and the extra highly abrasion-proof polyurethane protection conduit WELLFLEX® PUR 118 of NORRES are VDE certifi...

SIPOS Aktorik will be exhibiting at ACHEMA, which will take place from 11th to 15th of May in Frankfurt, Germany. On display will be SIPOS’ full portfolio of actuation solutions including latest design innovations for SIPOS 5 Flash variable speed actuation technology. New housing for the SIPOS 5 Flash range will be revealed with a ‘double-sealed’ round plug connection supplied as a standard pro...

Pipeline Isolation Valves for a Wide Range of Process Applications. Valves can be fitted with customer choice of Actuation. The parallel slide gate valves are produced in a wide range of sizes and designs (including Venturi and full bore) for fluid isolation duties on steam raising plant and process systems throughout industry. The outstanding feature of the parallel slide design is that of maintai...

Flange fittings have been providing top quality connections in installation for decades. They are dependable, standardised and robust. Buschjost has added a new flange valve range to its proven series of valves. The design of the devices have been completely revised in terms of valve technology and flange geometry and conform completely to the relevant standard in terms of hole pattern and size. Du...

Cleaning corrosive, dust-laden media presents a special challenge to both filter and filter cleaning systems. Buschjost offers some new filter valves that have been specially designed for this field of application to suit a wide range of loadings. To cover the widest spectrum of use our engineers developed four different solutions: · For filters used with average corrosive media a new series ha...

Simplicity that pays off: the new connecting system for all standard connecting elements The novel clamping system developed by the Masterflex AG fits many wire-reinforced Masterflex hoses and ensures quick and easy hose installation. Consequently, the hose user can continue using most commercial connecting elements, which translates into direct cost savings. Whether common connectors such as Ca...

Stäubli solutions perfectly matched to any food processing operation. Working air circuit - Compressed air circuit connection by: • Anti hose-whip safety couplings, withstanding daily washing, • Ergonomic self-retracting polyurethane connection units. - High quality air supplies to workstations and machines thanks to submicronic filters. - Ergonomic automatic stainless steel hose reels for ...

ODE steps up own 21HT-21HN combined acting solenoid valves series with the new Viton range, projected to work in all areas with slightly aggressive fluids, where NBR is not compatible (Oils, Technical Gas as Argon, Ozone) and to work with fluids at high temperature up to 140 °C. 21HT and 21HN series do not require a minimum operation pressure, while the maximum is 14 bar. All series are availab...

ODE steps up own 21HT-21HN combined operation solenoid valves series with the new Normally Open. The new series is available in NBR and Viton to respond to all standard applications and where there are slightly aggressive fluids and NBR is not compatible (Oils, Gasoline, Diesel, Gas Heat as Argon, Ozone) and to work with fluids at high temperature up to 140 ° C. The full HN and HT range is partic...

Polyfluor Plastics supplies thin wall tubing in PTFE, PFA, FEP and other fluorplastics. Also possible to supply marked and coloured tubing as well as heat shrink tubing. Standard thin wall tubing can be supplied in long continuous lengths (>500 meter). Tubing can be cut on specified lengths or produced and packed in cleanroom conditions.

Masterflex AG recommends hoses with fully incorporated stainless steel helix Hygienic transport of foodstuffs has always been a matter of importance; however, it becomes even more topical in view of the upcoming Anuga FoodTec in March. The Gelsenkirchen-based Masterflex AG, the trusted expert for upmarket hose and connecting systems made of innovative high-tech plastics, fabrics and foils, recom...

Conax Technologies HEGPK electrode sealed feedthroughs electrically and/or thermally isolate single electrodes, tubes or temperature sensors for use in vacuum furnaces, liquid level probes, transformers, environmental chambers, power leads and more. These bare electrical feedthroughs also seal against gases and liquids and resist electrode (also known as conductor) movement under pressure. The Co...

Any malfunction in a process control operation creates a crisis and often shuts down the process. One of the frequent causes is when an automated valve cannot completely close. This often occurs due to a build-up of torque in the valve over time to the point where the valve torque becomes greater than the closing torque of the spring-return actuator. Typical options are few and costly in terms of ...

A special Multiport Selector Manifold (MSM) has been designed by Framo Engineering for oil production projects realised by the Indian mineral oil company ONGC and the state-owned Chinese CNOOC. The core piece of the Manifold is a new multiport-valve equipped with an electric actuator, specially enhanced by AUMA. The new combined production and test manifold has also been selected by PDO Oman for us...

As world focus turns to preserving our environment, Habonim introduces its new series of ZERO-Stem-LEAK valves based on the HermetiX™ technology. HermetiX™ is a patented stem seal designed to reduce to a minimum stem leak and provide maintenance-free service. Named after its X-shaped design, the HermetiX's™ dynamic action enables improved performance as pressure increases. The New Habonim ZERO-Stem...

GEMÜ celebrated the inauguration of its new innovation and development centre, the 45-year company anniversary as well as the 70th birthday of the company’s founder and owner Fritz Müller. The valves, measurement and control systems specialist from Ingelfingen kicked off the 2009 New Year on the 2nd and 3rd January with two anniversary celebrations and about 1,000 guests from all over th...

GEMÜ China celebrated its 10th anniversary under the slogan "Growing together" together with the German and Swiss management as well as the persons responsible from the German sales team. From 31 October to 2 November, the Shanghai subsidiary of the Ingelfingen specialist for valve, measurement and control systems proudly presented the accomplished as well as the targets for the next ten years. Uwe...

A GOOD NEW FOR THE HYDRAULIC! SERV-CLIP® THE PIPE MEASURING POINT is a patented product and registered trade mark of BKM in Hagen-GERMANY. - Connect into system UNDER PRESSURE up to 630 bar (9100 psi) WITHOUT TUBING SEPARATION IN 3 MINUTES - (incl. M16X2) ALLOWS CONNECTION OF SENSORS AND SCREWED COUPLINGS CHECK IMMEDIATELY: Pressure, Temperature, Flow Rate, Lea...